1.1mm ITO conductive glass for touched screen/Indium Tin Oxide Coating for glass

Introduction

ITO glass has highly electrical conductivity yet with excellent transparence. It has been widely used in flat panel display and solar cells. The surface resistance of our ITO can be ranged from 8~100 Ohm/sq with the optical transmittance over 85%. Larger sized ITO glass is available upon request.

 ITO conductive glass can be divided into high resistor glass (whose electric resistance is beween 150ohm and 500ohm) ,regular glass(60-150ohm) and low eletric resisitance glass (less than 60ohm).

High resistor glass is usually used in Electron static discharge and touch concrol screen effect; regular glass is often applied in TN LCD while the low resistor glass is used in STN LCD and  transparent circuit board  etc.

 Special Properties

1.Electrically conductive and optically transparent

2.High VIS-NIR light transmission

3.High quality glass substrate

4.SiO2 barrier layer

5.Low roughness

6.High sheet resistance homogeneity

7.Uniform transmission homogeneity

8.Reflecting in the infrared range

Typical Applications

 1.Display technology

2.ITO coated microscope slide

3.Circuit substrate

4.Micro structuring application

5.Transparent EMF/EMI/EMC/RFI/HF shielding glass

6.Flat antennas for mobile communication

7.Conducting glass

8.De-Icing applications

9Heatable ITO slide & cover slip

Specifications of glass

Size:14″×16″/ 14″×14″.20" × 24"

300×300mm   /   300×350mm

300×360mm   /   370×470mm

Thickness:2.0mm,1.1mm,0.7mm,0.55mm,0.4mm,0.3mm

other specifications can be adjusted based on customers needs

We accept small orders.