Lab tests with ITO glass

ITO conductor glass/ITO conductive glass is based on the sodium-calcium or silicon-boron sheet glass, then using the magnetron sputtering method to coat with a layer of indium tin oxide films (commonly known as ITO). The main ingredient of the ITO film is indium tin oxide. In the case of only a few thousand angstroms thickness, the indium tin oxide has high light transmission and high conductive ability. The ITO used in the LCD display is a conductive glass with high transmittance. 

It is widely used in TN , STN , HTN ,LCD monitor as well as touch panel ,with minimum resistance of 2 . conventional products 30 /500 as well as specific products 2 /30 etc. both of them are produced under strict and durable quality criteria with a monthly capacity of 36,0000  sheet . 

1.How-how to ITO plating

ITO plating glass is made from extra thin float glass after it goes through slicing ,filing polishing and cleaning .Under the circumstances of vacuum and extreme heat , through magnetron shedding splashing , a plate of transparent Indium tin oxide is precipitated on glass surface which is used as conductive board of LCD

2. ITO conductive glass specifications

         glass substrate microscopic corrugation

                  Ito conductive plating specification

                                  250Å  thickness of Sio2

3.  ITO plating series

    specifications of glass

14×16/ 14×14 

300×300mm   /   300×350mm

300×360mm   /   370×470mm

other specifications can be adjusted based on customers needs

thickness of glass

0.3mm-5 mm 

4. scopes of usage

1. Various conductive glass used in TN,STN  in the line of LCD .
2.ITO glass ,high side resistance (200-500) used in the line touch panel
3. Other vacuum plating products

Using: Liquid -crystal display  (LCD) ,touch panel(TP ),electro luminescence display   (ELD ),solar energy battery , car rear-view mirror , glass screens of MP3 and cell phones and other transparent conductive plating .etc.afely export wooden packing