Access, buy CCIT VDSL MODEM CCPAM100 on China Suppliers Mobile

Product Details

Specifications

Ethernet over VDSL Converter
1.Cost-effect VDSL1 CO / CPE bridge solution
2.Complies with IEEE 802.3, IEEE 802.3u standards

Ethernet over VDSL Converter

Key Features

Cost-effect VDSL1 CO / CPE bridge solution

Complies with IEEE 802.3, IEEE 802.3u standards
DMT (Discrete Multi-Tone) line coding
Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
Built-in POTS / ISDN splitter
Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for
POTS connection
Voice and data communication can be shared based on the existing telephone wire
simultaneously
Supports up to 1536 bytes packet size
VDSL1 stand-alone transceiver for simple bridge modem application
Advantage of minimum installation time (Simply as Plug-and-Play)
Selectable target data rate and taget SNR margin
Supports extensive LED indicators for network diagnostics
Compact in size, easy installation

Specification

Model	CCPAM100M/S
Hardware Specification
Ports	10/100Base-TX: RJ-45, Auto-negotiation and Auto-MDI / MDI-X VDSL: 1 RJ-11, female Phone Jack PHONE: 1 RJ-11, Built-in splitters for POTS / ISDN connection
DIP Switch	4 position DIP switch
Functionality	Selectable fast and interleaved mode Selectable target data rate Selectable target SNR mode
Encoding	VDSL-DMT - ITU-T G.993.1 VDSL - ITU-T G.997.1
LED Indicators	One Power CO part 4 for RJ-11 / VDSL2 WAN : - Green, LNK / ACT - Green, CO mode - Green, Rate - Green, Duplex 2 for per RJ-45 10/100Base-TX port: - Green, LNK / ACT - Green, Speed CPE part 1 for RJ-11/ETH: - Green,LINK 2 for per RJ-45 10/100Base-Tx port: - Green, LINK - Green, ACT
Cabling Type	10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft) 100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft) VDSL: twisted-pair telephone or ISDN wires (AWG24 or better) up to 1.2km
Performance	Full VDSL2 bandwidth up to: (Down Stream / Up Stream) - 1500m -> 5/5Mbps - 1200m -> 10/8Mbps - 1000m -> 12/10Mbps - 800m -> 15/12Mbps
Dimension (W x D x H)	120 x 173 x 38 mm
Weight	0.5 kg
Power Requirement	CPE 12V DC1A CO 9V DC1A
Operating Temperature	0~50 Degree C
Storage Temperature	-25~70 Degree C
Operating Humidity	10~90%, relative humidity, non-condensing
Storage Humidity	10~90%, relative humidity, non-condensing
Standard Conformance
Regulation Compliance	FCC Part 15 Class A, CE
Standards Compliance	IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX ITU-T - G.993.1 (VDSL) - G.997.1

The actual data rate will vary on the quality of the coaxial cable and environment factors.