Composition: PC Front and Bakelite case, Four stud mounting,

Color:    Black case, white scale plate.

Scale Plate:   The normal scale plate is made of alloy-aluminium material white printed with black  scales,Values, units, technique symbols, etc.Scale plate with special requirements are available upon request.Such as color, scale with lighting functions and PVC noctilucence are available upon  request.

Pointer:            Normaly, the pointer is made of alloy-aluminium, it is black, and red, white are  

                           available Upon request.

Anti-static:      All meters are subject to anti-static treatment to minimize the static-effect to the 

                          accuracy of  the meters.

Damping and Overshoot: The overshoot is less than 15% when the pointer is at the 2/3 of the  

                                                  scale. Damping  and overshoot can be customized according to user’s 

                                                  requirements.

Accuracy:        Class1.5, 2.5;

Service condition: -20~+50 degree;

Operating position: Generally, meter is installed in vertical position. Other installation position can 

                                      be custom customized (please specify the desired angle). The accuracy class

                                      is just valid for the orresponding installation mode.

Insulation Test:    The test Voltage for BE&BP series is 2KV RMS for 1 minute with the frequency 

                                  50Hz.

Safety Precautions: Meters with damaged bezels or glass faceplates must be disconnected from      the mains. Scale plate, front frames and windows may only be replaced under  voltage-free conditions.

                                      The meter should be kept clean, if the meter is used in a manner not specified 

                                       by the manufacturer, the protective function may be impaired.

The advantages of Our products: Interchangeable Dial Changing the scale plate without opening

                                                                the meter. Under the same secondary current, the  scale plate

                                                                of  AC ammeter can be  Changed, no loss of accuracy.