New Products, description about MX-cardboard production line on China Suppliers Mobile

Product Details

This cardboard production line suitable for 2-5 layer gray board(300-600/m²)complex cardboard with needed thickness and specifications.This production line with rational design,compact structure,convenient cooperation,save energy and etc.This production line offset manually pasted and some weakness. Drastically reduce the production cost,improve the quality of products and improve the flatness of cardboard and strength of adhesive force,It is the ideal equipment for manufacturing cardboard.

Technological parameter

width	1200mm-2200mm
Design speed	60-100m/min
Working speed
Installed capacity
Cutting length
Cutting precision	40-80m/min
Max.weight	75kw
Equipment length	300-9000mm
Equipment height	4.2m
Equipment width	4.5m-5.5m
Products quantity	3.5t/h

Rational mechanical structure,strong form,good stability,have long performance life.

All operation control on the same side,easy to operate,with photo electricity counter.

With four set slitter knives,crosscut 400mm-2400mm.

Cut paper precision±2.5mm.

Special line on the surface of the glue applicator roller,surface hard chrome plating,even glue supply,low cost.

The glue applicator driven by frequency conversion motor with invert.keep the synchronization for glue applicator roller and double baker face machine by invert.and independent running.

Adjustment for gap between glue roller and doctor roller by electric or manual are optional,digital read out for the gap between glue roll and doctor roll is optional.

Press roll moves up and down by pneumatic.gap mini-adjustment by electric.

Sell-circulating glue supplying system to avoid glue hardening and to glue quantity keeping the glue good quality and saving.

Press roll press are optional.

Thin knife,thickness less than 1mm,smooth edge of the corrugated paper after cutting little crushing,high quality paper board.

A pair of emery wheels for each knife.

2 kinds of sharpening devices-manual and pneumatic,sharpening time and intervals decided by customers.By manual operation sharpness and longer life of the knife and the wheel is available.

Motorized transverse movement.

Stability and long duration by gear or rack drive.

1200-2200 cardboard production line

Shaftless mill roll stand:independent rising of the two arms.

Single facer machine:corrugated sharp angle roller diameter is 265mm-310mm,the electric motor power is 11kw-17kw with electromagnetic adjusting motor.

Duel roller gluing machine:adopts upper and middle two layers gluing and paper guiding roller for bottom end.

Drying machine:total length is 10m,composed of 14 blocks of heating board,pneumatic tensing device,with conveying belt automatic detaching function when power failure.

Molding part:the overall length is 6 meters and consisted of 27 pairs of molding shafts.

Longitudinal cutting machine:super thin knife or normal knife can be used according to user’s requirements;with high automation and convenient operation.

Transversal cutting machine :there are four configuration types:computer single or double-knife,or mechanical single or double-knife for user adoption.

Boiler coal consumption:120kg/hour.the boiler is of pressure free energy saving type;the temperature rising time of the machine from 0 degree to operating temperature will not over two hours and there’s nearly no oil consumption.

The product specification or mechanism may be changed or improved without notice.