Product Details

Product description

Rolling machine is developed in the middle of 1980, which is a new cement and saved energy powder grinding equipment. It can displace the low efficiency and high consumption ball mill in part or completely. Reduce the steel consumption and nose. It is suitable to not only new plant but also technical revision of old plant. Raise the output by 40 to 60 percent and reduce the power consumption by 30 to 50 percent. The material that its fineness is 0.8mm covers 20 to 35 percent after aqueezing the material. The fineness is less than 20mm which is covered 65 to 85 percent. The inner structure of small lump is filled with microdefect. Improve the easy abrasivity. The roller face is heat weld buildup. It is easy to maintenance in the abrasive layer.

Roller press is new cement saving energy grinding equipment and developed in the middle of 1980s, can replace the system of ball mill competently or in partial, it is characterized by low consumption and lower noise, also reform the old factory. After selecting the equipment, may increase output of 40-100% for ball mill, fine material of 0.08mm covers 20-55%after material cake is pressed, less than 2mm covers 65-85%, Internal structure of fine material is filled with many small cracks, the grind ability is improved greatly. The roller surface is used heat built-up welding; It is convenient to maintain the abrasive layer.

Technical parameter of Roller Press

Type	Diameter of roller	Width of roller	Max feeding granularity	Pre-crushing capacity		Main motor (KW)	Weight(T)
Type	Diameter of roller	Width of roller	Max feeding granularity	Clinker	Raw material	Main motor (KW)	Weight(T)
G240-200	2400	2000	85	1400~2000	1450~2050	5800	460
G200-180	2000	1800	80	1200~1400	1230~1430	4150	410
G200-160	2000	1600	80	1050~1280	1080~1310	3350	320
G200-120	2000	1200	80	810~980	830~1000	2950	250
G180-160	1800	1600	75	820~1000	850~1030	3750	260
G180-120	1800	1200	75	650~800	670~820	2540	225
G180-100	1800	1000	75	550~6500	570~670	2280	215
G170-120	1700	1200	70	600~700	620~720	2280	220
G170-100	1700	1000	70	500~600	520~620	1840	210
G160-150	1600	1500	65	650~780	670~800	2280	220
G160-140	1600	1400	65	600~700	620~720	2280	210
G160-120	1600	1200	65	500~600	520~620	1840	195
G160-100	1600	1000	65	400~500	420~520	1640	190
G150-120	1500	1200	60	450~550	470~520	1460	185
G150-100	1500	1000	60	400~500	420~520	1460	180
G140-80	1400	800	55	300~360	320~380	1160	125
G140-70	1400	700	55	240~300	260~320	1040	115
G140-65	1400	650	55	230~290	250~310	1040	115
G140-60	1400	600	55	200~280	220~300	920	110
G120-60	1200	600	50	180~205	195~220	600	65
G120-50	1200	500	50	150~185	165~200	540	62
G120-45	1200	450	50	110~150	125~180	460	60
G100-35	1000	350	45	60~70	80~90	380	35