Elevator & Lowerator:

Elevator & Lowerator are mainly designed to pile or unload blocks to the expected height with travel switch,
photoelectric switch and proximity switch. The main frame are made of 25#square steel tube and three chains and
roller are installed on both sides which have a load capacity of up to 15 tons

Programmed-controlled Finger Cart: is used to transport wet concrete products from elevator to curing room,
and take dried concrete products from curing room to lowerator. Designed for loads up to15 tons is powered by
motor & hydraulic and controlled with advanced and stable PLC modular controller.Controlled by variable
frequency and allocated by coding, which guarantee finger cart access to any position of curing room in accuracy
and safety.

Aggregate Mixer:

JN Series is a new type of forced mixer designed especially according to block-making machines, special demand
for the material. This kind of mixer using German technology, not only applies to produce common commercial
concrete and precast concrete but also have solved many problems about High Performance Concrete mixing. We
have developed and manufactured types of JN250, JN330, JN1000 and JN1500,etc.

JN series mixer has the following features:
1, MIXING DEVICE
Driven by the gearing system, the fixed on mixing arms and the scrapers on scraping arms crush and overturn the
material to complete the compelling mixing.
2, Maintaining Door
There is an observing port on the maintaining door.
3, The weighing system
The device effectively prevents the dust overflow the trough during the mixing to protect the environment.
4, Security device of the maintaining door
Reliable high-sensitive security switches are used in the maintaining door to make the maintaining work safe and
convenient.
5, Discharging device
The discharging door can be opened by hydraulic, pneumatic. The number of the discharging door is three at most.
And there is special sealing device on the discharging door to ensure the sealing reliable.