Specifications

PPR Pipe Extrsion Production Line with 65mm pipe extrusion machine
Mainly used for extruding PPR, PERT etc pipe products.

Product: PPR Pipe Extrsion Production Line with 65mm pipe extrusion machine  

Application and Feature:

This line is mainly used for extruding PPR, PERT etc pipe products. Equipped with co-extrusion machine head it can produce PPR fibre composite pipe.

1.      The design of groove feeding barrel and barrier type screw can improve the efficiency of plasticization. The extruding capacity is high and melting temperature and pressure is low and save energy source.

2.      The filtering type mould head are adopted, which guarantee the material is not sheared overly and prevent the material from being degraded.

 

Technical Parameters:

Model		PP-R63
pipe range(mm)		20-63
Capacity(kg/h)		90
Center height(mm)		1000
Single screw extruder	Extruder model	SJ 65
	Screw diameter(mm)	65
	L/D	30:1; 32:1
	Screw rotation speed(rpm)	80
	Motor power(Kw)	20/37
	Heating power(Kw)	20
	Cooling blower power(kw)	0.18
Vacuum calibration case	Length of Calibration case(mm)	6000
	Vacuum degree(Mpa)	-0.08
	Absorbing gas speed(m3/h)	60
	Water pump power(kw)	2X2.2
	Longitudinal moving motor power(kw)	1.1
Spraying case	Length of spraying case(mm)	4000-6000
	Power of water pump(kw)	2.2
Haul off	Driving motor(kw)	3
	Max pull(N)	7000
	Effective haul off length(mm)	1200
Blade type cutter	Blade diameter(mm)	350
	Driving power(mm)	2.2
	Working air pressure(Mpa)	0.7-0.7
Stacker	Length(mm)	6000

 

Photo: