LPV-12W |
Model | LPV-12-12 | LPV-12-24 | LPV-12-36 |
| | 12V | 24V | 36V |
| ±1% | ±1% | ±1% |
| 1A | 0.5A | 0.33A |
| 0~1A | 0~0.5A | 0~0.33A |
| 12W | 12W | 11.9W |
| 120mvp-p | 150mvp-p | 150mvp-p |
| | 170~264VAC, 235~373VDC |
| 47~63Hz |
| 0.1A/230VAC |
| 78% | 80% | 82% |
| cold start 30A/230VAC |
| | <0.5mA/240VAC |
| above 105%~135% rated output power |
Protection type: hiccup mode, auto-recovery after fault condition is removed |
| 15.6~17.8V | 30.6~33.2V | 42.6~44.2V |
protection type: hiccup mode, auto-recovery after fault condition is removed |
| ≥55°Cfan onm ≤50°Cfan off,≥85°C shutoff O/P |
protection type: shutoff O/P, auto-recovery after temperature goes down |
| | -10°C~+60°C, 20%~90%RH |
| -20°C~+85°C, 10%~95%RH non condensing |
| | 10~500Hz, 2G 10min/1cycle, period for 60minutes, each axes |
| I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC |
| | Fit UL1012, IP67 protect level |
| Fit EN55022,CLASSA |
| | 132*30*20mm (L*W*H) |
| 0.15kg/100pcs/16kg/0.027m³/0.94CUFT |
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
3. Tolerance : includes set up tolerance, line regulation and load regulation. |