CZ Series Standard Chemical Process Pump
USD $236 - $3,612 /Set
Min.Order:1 Set
Shijiazhuang Nainater Slurry Pump Co., Ltd.
CZ Series Standard Chemical Process Pump
Type IH pump is single-stage, single-suction chemical cantilever centrifugal pump, it is instead of type F anti-corrosive centrifugal pump, it is a saving energy products, it widely used in the field of chemical engineering, petroleum, metallurgy, papermaking, food, medicine, fiber, etc., it is suitable for delivery corrosive medium or the medium which are not permitted to contaminate, the inlet pressure is ≤0.3MPa, the medium temperature is 20°C to 105°C, it can deliver more higher temperature medium by cooling unit.
IH Single-suction pump/Single-stage pump/Chemical pump/Centrifugal Pump
Performance Range(design point)
Flow:6.3~400m3/h
Head H :5m~125m.
Instruction of pump type
For example:IH50-32-160A
International Standard Chemical centrifugal pump
Inlet diameter is 50mm
Outlet diameter is 32mm
Nominal impeller diameter is 160mm
Impeller first cut
Modle | r/min | capaicty | head | power | caliber | NPSH | ||
m3/h | l/s | m | Inlet | outlet | m | |||
IH50-32-125 | 2900 | 7.5 | 2.08 | 23 | 2.2 | 50 | 32 | 2 |
12.5 | 3.47 | 20 | 2 | |||||
15 | 4.17 | 18 | 2.5 | |||||
7.5 | 2.08 | 23 | 2.2 | 50 | 32 | 2 | ||
12.5 | 3.47 | 20 | 2 | |||||
15 | 4.17 | 18 | 2.5 | |||||
7.5 | 2.08 | 23 | 3 | 50 | 32 | 2 | ||
12.5 | 3.47 | 20 | 2 | |||||
15 | 4.17 | 18 | 2.5 | |||||
1450 | 3.75 | 1.04 | 5.75 | 0.55 | 50 | 32 | 2 | |
6.3 | 1.74 | 5 | 2 | |||||
7.5 | 2.08 | 4.5 | 2.5 | |||||
3.75 | 1.04 | 5.75 | 0.55 | 50 | 32 | 2 | ||
6.3 | 1.74 | 5 | 2 | |||||
7.5 | 2.08 | 4.5 | 2.5 | |||||
3.75 | 1.04 | 5.75 | 0.55 | 50 | 32 | 2 | ||
6.3 | 1.74 | 5 | 2 | |||||
7.5 | 2.08 | 4.5 | 2.5 | |||||
IH50-32-160 | 2900 | 7.5 | 2.08 | 34.5 | 3 | 50 | 32 | 2 |
12.5 | 3.47 | 32 | 2 | |||||
15 | 4.17 | 30 | 2.5 | |||||
7.5 | 2.08 | 34.5 | 4 | 50 | 32 | 2 | ||
12.5 | 3.47 | 32 | 2 | |||||
15 | 4.17 | 30 | 2.5 | |||||
7.5 | 2.08 | 34.5 | 5.5 | 50 | 32 | 2 | ||
12.5 | 3.47 | 32 | 2 | |||||
15 | 4.17 | 30 | 2.5 | |||||
1450 | 3.75 | 1.04 | 8.6 | 0.55 | 50 | 32 | 2 | |
6.3 | 1.74 | 8 | 2 | |||||
7.5 | 2.08 | 7.5 | 2.5 | |||||
3.75 | 1.04 | 8.6 | 0.75 | 50 | 32 | 2 | ||
6.3 | 1.74 | 8 | 2 | |||||
7.5 | 2.08 | 7.5 | 2.5 | |||||
3.75 | 1.04 | 8.6 | 1.1 | 50 | 32 | 2 | ||
6.3 | 1.74 | 8 | 2 | |||||
7.5 | 2.08 | 7.5 | 2.5 | |||||
IH200-150-400 | 1450 | 240 | 66.7 | 55.8 | 90 | 200 | 150 | 3 |
400 | 111.1 | 50 | 3.5 | |||||
460 | 127.8 | 47 | 4 | |||||
240 | 66.7 | 55.8 | 110 | 200 | 150 | 3 | ||
400 | 111.1 | 50 | 3.5 | |||||
460 | 127.8 | 47 | 4 | |||||
240 | 66.7 | 55.8 | 160 | 200 | 150 | 3 | ||
400 | 111.1 | 50 | 3.5 | |||||
460 | 127.8 | 47 | 4 |