Product Details

Rubber machine ,Rubber compression molding machine ,vacuum heating press

1. Machine Features:

1. With double-motor double-pump double-oil-circuit system design, two working positions are controlled independently, and operate independently.

2. Adopting former top mold opening and closing, so that a mold is pushed out from the clamping mechanism, which is opened in front of the machine, thus it is easy to take out the product;

3. Using high negative pressure vacuum hood design, so that a mold can be in a nearly full vacuum environment, improving mold venting;

5. The vacuum hood can achieve vacuum of -650mmHG or above within 4 seconds, so it is most suitable for products difficult in molding and requiring precision;

2. Application:

Applicable to o-rings, packing, keyboards, rotary drums, pharmaceutical stoppers, anti-shock supplies, black rubber products, daily necessities, gaskets, conductive products, electronic equipment, etc. whose appearance require beautiful and precision edges

3. Main model and parameter :

No.	Item	Unit	Model Item Parameters				Remarks
No.	Item	Unit	TVS-200 (double-seat)	TVS-250 (double-seat)	TVS-300 (double-seat)	TVS-400 (double-seat)	Remarks
1	Clamping Force	ton	200	250	300	400
2	Opening Force	ton	5	6	6	6
3	Closing Force	ton	7	8	8	8
4	Master Cylinder Diameter	mm	φ350	φ400	φ450	φ500
5	Master Cylinder Stroke	mm	250	250	250	300
6	Mold Stroke	mm	660/840	750/840	750/840	750/840	2-4RT/track
7	Former Top Cylinder Stroke	mm	250	300	300	300
8	Flip Angle	°	75	75	75	75
9	Upper Hot Plate Dimensions	mm	503X508	600X600	600×600	700×700	Right and left x front and back
10	Lower Hot Plate Dimensions	mm	540X560	650X600	650×650	700×760	Right and left x front and back
11	Heating Power	kW	13.5x2	18x2	18×2	18x2	Total
12	Oil Pump Motor Power	kW	7.5x2	7.5x2	7.5×2	7.5×2	Total
13	Ultimate Vacuum	mbar	0.5	0.5	0.5	0.5
14	Pumping Rate	m3/h	100	100	100	100
15	Oil Tank Capacity	L	450	450	450	500
16	System Pressure	bar	200	200	200	200
17	Cooling Water Flow	L/min	20	20	20	20
18	Total Power	kW	42	51	51	55
19	Dimensions	m	3.0×2.4×2.0	3.5×2.3×2.65	3.35×2.55×2.4	4.0×2.8×2.8	Mold Stripping Former Top
20	Weight	T	9	11.7	13.5	22

4. Machine and products pictures :

5. Package :

6. Our exhibition :

7.The main service item on our machine

installation and debugging: Our engineers will teach you about the installation and debugging for free.
Technology training : Our company will offer technology training for your operation.
After-sales service: We will supply the free repairment on this machine for one year,

but will supply the maintenance lifetime. ( the service is only for natural damage)