12V T10 automotive led lights
Negotiable /Piece
Min.Order:20 Pieces
Ningbo Yinzhou Masahiro Electron & Arts Inc.
Working Temp: | -25°C~85°C |
Storage Temp: | -40°C~125°C |
Working voltage: | DC6-16V (DC13.5V) |
Working Current: | 0.31A |
Reverse-Battery Protection: | YES |
No-polarity: | YES |
Maximum Output: | <=5W |
Minimum Output: | >=4W |
LED Kelvin: | >=8000K |
LM per pc: | 7~8LM |
Luminous Angel: | 120° |
Chip manufacture: | Taiwan Epistar |
FIVE ADVANTAGES | |
Tai Wan imported 5050 chip | |
Five angle emitting,larger emitting area | |
High cost/Big solder joints | |
Good quality conductor/better conduction | |
High quality glass fiber board/higher heat resistance |
Wide range | |
Five angle emitting design,wider emitting area |
FAST RESPONSE | |
Do NOT need start up time | |
Lighting in barely a second |
Low power consumption | |
Led lower power dissipation | |
Better protect vehicle circuit&Power saving |
Uneasy to oxidize | |
Led without filament, great heat dissipation,low current,lower calorific value | |
Circuit is Uneasy to be oxidized |
Stability | |
Anti vibration,impact resistance,reliable,slow heating | |
Revolutional solid state light emitter |
Longer life span | |
Emitting hours can reach 50 000 hours in total | |
Over 10times than the same output’s filament lamp |