Name: Wholesale P+F AS-Interface sensor/actuator VAA-2EA-G2-ZA/EA2
Brand: P+F
Availability: InStock

Product Details

P+F AS-Interface sensor/actuator VAA-2EA-G2-ZA/EA2

Product Description

AS-Interface sensor/actuator module VAA-2EA-G2-ZA/EA2

AS-Interface certificate
Degree of protection IP67
Addressing jack
Flat cable connection with cable piercing technique, variable flat cable guide
Communication monitoring
Inputs for 2- and 3-wire sensors
Power supply of outputs from the external auxiliary voltage
Power supply of inputs from the module
Function display for bus, ext. auxiliary voltage, inputs and outputs
Monitoring of sensor overloads

Technical data of VAA-2EA-G2-ZA/EA2

Product Description
G2 flat module 2 inputs (PNP) and 2 electronic outputs

General specifications
Slave type		Standard slave
AS-Interface specification		V3.0
Required master specification		≥ V2.0
UL File Number		E87056
Indicators/operating means
LED FAULT		error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply
LED PWR		AS-Interface voltage; LED green
LED AUX		ext. auxiliary voltage U_AUX; LED green
LED IN		switching state (input); 2 LED yellow
LED OUT		Switching state (output); 2 LED yellow
Electrical specifications
Auxiliary voltage (output)		24 V DC ± 15 % PELV
Rated operating voltage		26.5 ... 31.6 V from AS-Interface
Rated operating current		≤ 40 mA (without sensors) / max. 190 mA
Protection class		III
Input
Number/Type		2 inputs for 2- or 3-wire sensors (PNP), DC
Supply		from AS-Interface
Voltage		21 ... 31 V
Current loading capacity		≤ 150 mA (T_B ≤ 40 °C), ≤ 120 mA (T_B ≤ 60 °C), short-circuit protected
Input current		≤ 8 mA (limited internally)
Switching point		according to DIN EN 61131-2 (Type 2)
	0 (unattenuated)	≤ 1.5 mA
	1 (attenuated)	≥ 4.5 mA
Signal delay		< 2 ms (input/AS-Interface)
Signal frequency		≤ 250 Hz
Output
Number/Type		2 electronic outputs, PNP
Supply		from external auxiliary voltage U_AUX
Current		1 A per output
Voltage		≥ (U_AUX - 0.5 V)
Programming instructions
Profile		S-3.F
IO code		3
ID code		F
ID1 code		F
ID2 code		F
Data bits (function via AS-Interface)		input output
	D0	IN1 -
	D1	IN2 -
	D2	- OUT3
	D3	- OUT4
Parameter bits (programmable via AS-i)		function
	P0	Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (basic setting)
	P1	Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (basic setting)
	P2	Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (basic setting)
	P3	not used
Compliance with standards and directives
Directive conformity
	EMC Directive 2004/108/EC	EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999
Standard conformity
	Noise immunity	EN 61000-6-2:2001
	Emitted interference	EN 61000-6-4:2001
	Input	EN 61131-2:2007
	Degree of protection	EN 60529:2000
	Fieldbus standard	EN 50295:1999, IEC 62026-2:2006
Ambient conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protection		IP67
Connection		Cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector
Material
	Housing	PBT
Mass		100 g
Mounting		Mounting base

Term & Payment :

1. Payment: T/T in advance or PayPal, Western Union

2. Delivery time : 4-6 weeks working days after receiving payment

3. Shipment: Express (FedEx, DHL, UPS & TNT) or forwarder

4. 7 days free replace & 1 year free repair for quality warranty