Mesh Count: 60mesh/inch
Wire Dia: 0.15mm(0.006")
Width Opening: 0.27mm
Open Area: 41%
Weight: 0.76kgs/m2
Material: Nickel 205 ( UNS N02205 )
Type of Weave: plain
Standard Roll Widths: 36", 48",60"
Standard Roll Length: 100' or 30meters.
- Nickel 201 wire mesh – UNS N02201
- Nickel 200 wire mesh – UNS N02200
- Nickel 205 wire mesh – UNS N02205
Nickel 205 is similar to Nickel 200, but has compositional adjustments to enhance its performance in electrical and electronic application.
Nickel 201 is the low carbon version of Nickel 200. It is preferred to Nickel 200 for applications involving exposure to temperatures above 600°F. With low base hardness and lower work-hardening rate, it is particularly suited for cold forming.
Mesh: 5mesh -200mesh
Chemical Composition(%):
Ti | Ni | Mn | C | Si | Fe | Cu | S | Mg |
0.01 - 0.05% | 99.0% | 0.35% | 0.15% | 0.15% | 0.20% | 0.15% | 0.008% | 0.01-0.08% |
Physical Properties
Density | 8.89 g/cm3 |
Specific Heat | 440 J/kg K |
Electrical Resistivity | 8.5 micro ohms cm |
Curie Temperature | 358°C |
Melting Range | 1446°C |
Thermal Expansion | (106K) 14.3 (20-300°C) |
Mechanical Properties:
Annealed: 400-500N/ mm2
Hard Drawn: 700 - 900 N/mm2
Service Temperature: Tensile strength and elongation drop significantly at temperatures above
315°C (600°F). Service temperature is dependent on environment, load and size range.
Applications:
1. Manufacture and handling of sodium hydroxide, particularly at temperature above 300C.
2. Production of viscose rayon. Manufacture of soap.
3. Alanine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane.
4. Manufacture of vinyl chloride monomer.
5. Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.