Specifications
Heat Exchanger Gaskets .1) High Quality .
2) Resonable Price .
3) On Time Delivery .
Heat Exchanger Gaskets
"Spiraget" Camprofile gaskets consists of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofile's can be used without sealing layers to provide an excellent seal but there is a risk of flange surface damage.,
The Very wide seating stress range (minimum to maximum stress) of the Camprofile gasket makes it,.
Highly suitable for varying temperature and pressures.
Less sensitive to assembly faults . Suitable for light and heavily constructed flanges.,
Dependent on layer material Camprofile gaskets are resistant to temperature upto 1000 C
Resistant to media pressures upto 250 bar.,
When assembled the layer thickness of the sealing material is extremely small (0.5mm) thus reducing leaks, reject rates and environment pollution.
The gasket will not damage the flange surface and can be easily removed .
Camprofiles will not damage the flange faces even at extreme seating load.
Excellent performance when subject to fluctuating temperature and pressures.
Direct replacement for existing gaskets. No special flange finish is necessary.
HEAT EXCHANGER / METAL JACKETED SOFT FILLER GASKET
Metal jacketed gaskets are specially designed and widely used on smooth flanges applications and are ideal for Heat Exchangers, Auto claves, columns, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services.
CLADDING METAL
Soft Iron, Low carbon steel, Monel Aluminium, Copper, Brass, Cupronickel 90%/10%, 70%/30%, Inconel 600,800, of different Grades Stainless steel,
FILLER
Asbestos mill board, (CAF), Non asbestos, PTFE, Grafoil
We have adequate capacity to produce any shape and size with many compartmental ribs out of different materials for heat transfer equipment, coolers, condensers, joints etc.Heat Exchanger gaskets are more compressible than sole-metal corrugated types and offer better compensation for flange irregularities when high pressures are to be sealed.
MAC - Spiraget Corrrugated Double Jacketed Asbestos Gasket:
Here the asbestos filler is fullly encased by a two-piece corrugated metal jacket which covers both edges and both faces of the filler. Outer piece, in addition to covering the edges, extends and overlaps the other piece.
MAD - Spiraget Open double Jacketed Asbestos Gasket:
In this type of gasket the asbestos filler is fully enclosed by a two-piece metal jacket which covers both edges and both facings of the filler. Outer piece, in addition to covering the edges, extends and overlaps the other piece.
Contact Person: Mrs. Gayathree Krishna
Business Manager
Contact No. 044- 42897500
Email Id: cori @ vsnl .com
