Specifications
Ring type Joint Gaskets are designed to seal by "initial line contact" or wedging action between the mating flange
Ring Type Joint Gaskets
Ring type Joint Gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. By applying pressure on the seal interface through bolt force, the softer metal of the gasket flows into the micro fine structure of the harder flange material, creating a very tight and efficient seal,.
CROSS SECTION
Oval Type
The contact face is in oval shape. It provides a high reliability seal. These gaskets comply with ASME B-16.20.
Octagonal Type.
More accurate in dimensions and surface finish than oval type because it consists of straight surfaces only. A Higher torque load is required to flow the gasket material into imperfections of the flange facings. These gaskets comply with ASME B-16.20.,
BX type
Designed to API 6A. Interchangeable with the oval and octagonal series of identical reference numbers, and used in the same flange grooves,.
RX type
Designed to API 6A for use with grooved flanges for special applications involving high pressures from 5,000 to 15,000 psi.,
IX type
AX type
ARBON STEEL, SOFT IRON MONEL® 400 HASTELLOY B2 & C276
304 316Ti NICKEL 200 COPPER
304L 310 INCONEL® 600,625&x-750 ZIRCONIUM
316 321 INCOLOY® 800 & 825 DUPLEX
316L 3CR12 TITANIUM PTFE(INNER RINGS ONLY)
SIZES
We manufacture Ring type joint gaskets of all sizes and shapes
FLANGE STANDARDS
Ring joint gasket can be manufactured in accordance with all relevant gasket standards and specifications to suit the following flange designations:
API 605 (ASME B16.47 SERIES B)
ASME/ANSI B16.5
BS 1560
BS 4504
BS 10
DIN DIN FLANGES
FRENCH NF STANDARD
JIS FLANGES
MSS SP 44 (ASME B16.47 SERIES A)
ASME/ANSIB16.5 | MSS SP44 (ASME B16.47 SERIES A) (AWWA) |
BS 1560, BS10, BS4504 | DIN FLANGES, JIS FLANGES |
API 605 (ASME B16.47 SERIES B) | FRENCH NF STANDARD |
Contact Mrs. Gayathree Krishna
BUSINESS MANAGER
Contact No. 044 - 42897500
cori @ vsnl .com