Vertical underwater pump with agitator

FEATURES / BENEFITS

• Temperature sensor – Over-temperature sensors protect the motor by sounding an alarm or shutting down the unit if internal temperatures exceed safe operating limits.
• Moisture detector – A twin electrode system provides double protection by detecting moisture intrusion in either the motor housing or the mechanical seal chamber.
• Mechanical seals – The TBWQ double-seal
  arrangement in which both sets of seal springs are enclosed in the oil reservoir. Silicon Carbide Seal faces are subject to submergence pressure only for greatly extended wear life.
• Heavy-duty water end – Standard high chrome iron construction coupled with heavy section
  thickness provides the ultimate in protection against abrasive wear in heavy slurries.
• Easy maintenance access – T-bolt construction allows rapid disassembly of the pump end for
  maintenance access. The heavy-duty impeller is not screwed on, but keyed to the shaft for easy removal and protection against movement
  during reverse rotation.
• Optional agitator – A robust agitator can be fitted to the suction eye allowing the pump to agitate high concentrations of solids.

OPTIONAL FEATURES

• Cooling jacket allows continuous pump operation with the motor completely unsubmerged
• Suction saver prevents clogging in sumps where tramp material or very large solids are present
• Quick disconnect guides the tbw into the sump with automatic connection to discharge piping.
• Discharge elbow in high chrome iron with heavy wall thickness allows for lower cost installation by having the correctly designed and sized discharge elbow for your application
• Sparger ring designed for your application that allows for improved sump removal of larger solids by spraying high pressure liquid back into the sump
• Slide bracket allows for easier installation on-site and provides correct positioning of the pump in your sump

If you insterest of our pump,Pls contact me freely.

Bob wang

skype:sangdabob