petroleum pipe line washing pump diesel driven

This series pump advantage:

Diesel engine washing pump

   The diesel pump set is designed for oil pipeline purposes

 Include common base, muffler, air filter, toolbox; * 2, automatic battery charger, stopping each magnet control system

wooden packaging

1. Heavy and robust centrifugal water pumps

2.  hand threshing machine throttle

3. High quality slurry pump manufacture

4. 18 months warranty(except flow passage components)

5. Certificates: ISO CE SGS

6. OEM service supply

7. The shortest delivery time(10~25days)

8. chromium content>26%

water Pump Specification:

Size range (discharge):  1” to 18” /  15 mm to 450 mm

Capacities:  to 22,000 gpm(5,000 m3/hr)

Heads: to 240 ft (73 m)

Pressures: to 350 psi / to 2,020 kPa

water Pump Application:

Industries served

Mining & mineral processing

Mine Dewatering

Sand and gravel

Chemical and fertilizers

Power generation

Pipeline transport

Water and Waste Water:

General Industry

Slurry Pump Feature:

• Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints.
• Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance. 

Slurry Pump Construction

Pump Body: Cast Iron/Grey Iron
Front Cover: High Chrome alloy/ Rubber lined

Impeller: High Chrome alloy/ Rubber lined
Mechanical Seal: Carbon/Ceramic/Stainless Steel
Motor Housing: Alloy Aluminum
Shaft: Carbon Steel/Stainless Steel/High Frequency Wedding Shaft
Insulation: Class B / Class F
Protection: IP54 / IP55/IP67
Cooling: water cooling

If you insterest of our pump,Pls contact me freely.

Bob wang

skype:sangdabob