Product Details

ZVA fuel nozzle manufacturers zva fuel nozzle fuel filling nozzle from china

Product Description

ZVA DN 16 automatic nozzle is a fuel-dispensing nozzle with an automatic safety shut off for wet-hose use with electrical operated petrol dispensing pumps.

Ø Working principle- The flow through the nozzle creats a vacuum at the valve seat. Air is drawn in through the sensing port at the tip of the spout, through the safety cut out, past the diaphragm,and into the fuel. The valve will remain open while the air flows freely. When the fuel reaches the sensing port, suction builds up rapidly until it lifts the diaphragm and trips the automatic action which shuts the valve.The mechanic also trips if the ball of the safety cut off rolls back to obstruct the free air flow.It will also occur if the spout is pointed upwards or if the nozzle is dropped onto the ground. The valve opens with the flow, allowing smooth low control for"to-the penny" dispensing. It closes against the flow for a soft shock-less closure.

Ø All type of guards are available if requested.
Ø All type of guards with block magnet are available if requested.
Ø "ZVA" logo or blank are available.
Ø 100% Factory tested.

Material
Body	Aluminum
Spout	Aluminum
Swivel	Aluminum
Seals	Buna-N, Viton
Covers	PVC

Technical Specifical
Working Pressure	0.2 Mpa
Flow Rate	15 - 45 L/m
Auto Shut-off sensibility	0.1 second
Spout Internal Diameter	16mm
Intel Thread	M34 × 1.5
Net Weight	1.1 KG

Order Select

Order Specifications
Item No.	Swivel	Inlet Size
ZVA DN1901	without swivel	M34 × 1.5
ZVA DN1902	with swivel	Female, BSP, 3/4"
ZVA DN1903	with swivel	Female, NPT, 3/4"
ZVA DN1904	with swivel	Male, BSP, 3/4"
ZVA DN1905	with swivel	Male, NPT, 3/4"
ZVA DN1906	with swivel	Female, BSP, 1"
ZVA DN1907	with swivel	Female, NPT, 1"
ZVA DN1908	with swivel	Male, BSP, 1"
ZVA DN1909	with swivel	Male, NPT, 1"