Specifications

this image intensifier is the electronic output equipment which converts the x-ray image into the visible light

Newheek NK-23XZ-II Image Intensifier

I. Brief Introduction:

NK-23XZ-II is a 23/16/12 cm triple mode x-ray image intensifier. It is the electronic output equipment which converts the x-ray image into the visible light image. It is installed on the x-ray TV system, which is applicable to the x-ray fluoroscopy and radiograph.

II. Construction:

It is composed of x-ray image multiplier tube, tube container, high voltage power supply (which is set inside of tube container) and low voltage power supply (which drives the high voltage power supply).

III. Application:

The nominal entrance field of view is 23cm (9inch), which is mainly application to C-arm, diagnosic radiograph and fluoroscopy x-ray machine, digital RF x-ray machine, lithotrity and industrial detection X-ray machines etc.

IV. Main Technological Parameters:

1. Photoelectric Performance:

(1) Input screen size: 230/160/120mm

(2) Useful entrance field of view size: 216/161/122mm

(3) Output image diameter: 25mm

(4) Min limiting resolution (centeral): 46/52/62Lp/cm

2. Low Voltage Power Supply Performance Parameters:

(1) Input voltage: 86V~ 265V

(2) Input power supply frequency: 50Hz/60Hz

(3) Output voltage: 24V±0.5V

(4) Output current (effective value): 1.5A

3. Standard Configuration:

(1) 24V power supply box: 1 piece

(2) 24V power supply cable: 2 pieces

(3) Ground wire: 1 piece

(4) Image intensifier: 1 piece

(5) Service manual: 1 copy

(6) Quality Certificate: 1 copy