Name: aluminium solar frame 45 cone industry use
Brand: JAMM
Availability: InStock

Product Details

Specifications

1.simple and easy installation
2.high brightness and hardness
3.strong coated adhesion
4.anti-scratch,smoothness

various shapes of aluminum extrusion profile

Product Details

Aluminum Alloy	6063, 6061, 6082
Temper	T5, T6
Surface Treatment / Surface finishing	Mill finish, Anodizing, Electrophoresis, Powder coating, Wood grain finishing, etc.
Colour	Any colour you want
Length	5.5 - 6.0 meter as your request
Supply ability
Application
Certificate
Normal order sequence	1. Confirm the drawings, details and price;
	2. If you use our mold, no fee. If you want to make a new extrusion mold, you have
	3. We send samples to you for your confirmation;
	4. Make the payment of 30% initial deposit, start production; Then delivery.
warranty	1. GB5237-2008 equal to EN12020-1.2(2001);
	2. Within 15 years without colour changing, all life without surface peeling off;
	3. All life without deformation without outer force
Payment terms	T/T, L/C , etc.
Specification	A. Alloy: 6063, 6061, 6082
	B. State: T5/T6
	C. 5.5 - 6.0 meter as your request
	D. Normal Anodizing thickness: 8-10um
	E. Normal powder coating thickness: 40-80um
	F. Hardness(HW): ≥ 10


Packaging	Usual packaging for aluminum extrusion profile is plastic protective film on
MOQ	1 Ton
Delivery time	7 days for making a new mold, 15 days if the mold is ready.

surface treatment

Mill finish	Finish of aluminum itself, with a natural anodic layer formed in the air, weak corrosion resistance
Anodizing	Through an eletrical process to form a certain layer of anodic layer on the surface of profile, available in
Eletropharesis	Base on anodized process, an extra transparent film is formed to make the surface clearer and look bit
Powder coating	The powdered paint is electrostatically charged and sprayed onto the part, to form a thick layer to protect
Wooden grain	New technology in finishing to form a texture look like real wood. Handtouch orfilm transfering are both available
Polishing	By buffing and chemical process to form mirror like finish, suitable for decorative application

packaging

EP paper inside for each piece then shrink paper. or carton paper then pallet. or wooden carton. ect

Delivery time

7 days for making a new mold, 15 days if the mold is ready.

Payment terms

T/T, L/C , etc.

meterial

Chemical Composition			6063 T5
Si	Fe	Cu	Mn	Mg	Zn	Ti	Cr	Others	total others
0.2-0.6	M.0.35	M. 0.1	M. 0.1	0.45-0.9	M. 0.1	M. 0.1	M. 0.1	M. 0.05	0.15
Mechanical property
Yield Strength		Tensile Strength		Extensibility		hardness
110Mpa		160Mpa		8%		8 HW

Manufacture technological process

Chief manufacture technological process:

aluminium ingot & alloy→melting and casting→extrusion→powder coating→pouring rubber for heat insulation→checkout→packing→PVDF coatinganodizingelectrophoresis→put in products warehouse.