Soft magnetic alloy Permalloy strip china supplier
USD $30 - $45 /Kilogram
Min.Order:50 Kilograms
Xi'an Gangyan Special Alloy Co., Ltd.
Soft Magnetic Alloy Permalloy 1J50 1J79 1J85 (GBn198-88)
Note:
Soft Magnetic Alloys are ferromagnetic materials that have little or no retentivity. They are magnetized in a ma
gnetic field and when removed from the field, they lose most, if not all, of the magnetism they exhibited while in the filed.
1J46/1J50/1J77/1J79/1J85 High Permeability Alloy is one such Nickel-Iron Soft Magnetic Alloy offered by xagy.
Grade & Chemical Composition (see Table 1)
Table 1 Grade & Chemical Composition
Sort | Grade | Chemical Composition (%) | ||||||||||
C≤ | P≤ | S≤ | Mn | Si | Ni | Cr | Co | Mo | Cu | Fe | ||
High magnetic conductivity higher saturation magnetic flux density soft magnetic alloy | 1J46 | 0.03 | 0.020 | 0.02 | 0.60∼1.1 | 0.15∼0.3 | 45.0∼46.5 |
|
|
| ≤0.20 | Balance |
1J50 | 0.30∼0.6 | 0.15∼0.3 | 49.0∼50.5 |
|
|
| ≤0.20 | |||||
1J54 | 0.30∼0.6 | 1.10∼1.40 | 49.0∼51.0 | 3.80∼4.2 |
|
| ≤0.20 | |||||
High initial permeability of soft magnetic alloy | 1J76 | 0.30∼0.60 | 0.15∼0.3 | 75.0∼76.5 | 1.80∼2.2 |
|
| 4.80∼5.2 | ||||
1J77 | 0.30∼0.60 | 0.15∼0.3 | 75.0∼78 |
|
| 3.9∼4.5 | 4.80∼6 | |||||
1J79 | 0.60∼1.1 | 0.30∼0.50 | 78.5∼80.0 |
|
| 3.80∼4.10 | ≤0.20 | |||||
1J80 | 0.60∼1.1 | 1.10∼1.5 | 79.0∼81.0 | 2.6∼3.0 |
|
| ≤0.20 | |||||
1J85 | 0.03 | 0.020 | 0.02 | 0.30∼0.60 | 0.15∼0.3 | 79.0∼81.0 |
|
| 4.80∼5.20 | ≤0.20 | ||
1J86 | ≤1.00 | ≤0.30 | 80.5∼81.5 |
|
| 5.80∼6.2 |
| |||||
Moment magnetic alloy | 1J34 | 0.30∼0.60 | 0.15∼0.30 | 33.5∼35.0 |
| 28.5∼30 | 2.80∼3.2 | ≤0.20 | ||||
1J51 | 0.30∼0.60 | 0.15∼0.30 | 49.0∼50.5 |
|
|
| ||||||
1J52 | 0.30∼0.60 | 0.15∼0.30 | 49.0∼50.5 |
|
| 1.80∼2.2 | ||||||
1J65 | 0.30∼0.60 | 0.15∼0.30 | 64.5∼66.0 |
|
|
| ||||||
1J67 | 0.30∼0.60 | 0.15∼0.30 | 64.5∼66.0 |
|
| 1.80∼2.2 | ||||||
1J83 | 0.30∼0.60 | 0.15∼0.30 | 78.5∼79.5 |
|
| 2.80∼3.2 | ||||||
1J403 | 0.30∼0.60 | 0.15∼0.30 | 39.0∼ 41.0 | 24.5∼25.5 | 3.80∼4.2 | 3.80∼4.2 |
Specification:
Sheet/Plate, Pipe/Tube/Capillary, Bars/Rods
Size Range:
*Sheet---thickness 0.05mm~3.0mm, width:≤300mm,Condition: cold rolled, bright, bright annealed
*Plate---thickness 3.0mm~40.0mm,width:≤300mm,Condition: cold rolled, hot rolled, annealed
*Round Wire---Dia 0.1mm~Dia 5.0mm,Condition: cold drawn, bright, bright annealed
*Flat Wire---Dia 0.5mm~Dia 5.0mm,length:≤1000mm,Condition:flat rolled, bright annealed
*Bar---Dia 5.0mm~Dia 8.0mm,length:≤2000mm,Condition:cold drawn,bright, bright annealed
Dia 8.0mm~Dia 32.0mm,length:≤3000mm,Condition:hot rolled,bright, bright annealed
Dia 32.0mm~Dia 180.0mm,length:≤1300mm,Condition:hot forging,peeled, turned, hot treated
Capillary---OD 8.0mm~1.0mm,ID 0.1mm~8.0mm,length:≤1500mm,Condition: cold drawn, bright, bright annealed
Pipe---OD 120mm~8.0mm,ID 8.0mm~120mm,length:≤2000mm,Condition: cold drawn, bright, bright annealed