Drying Equipment Hot Air stove
USD $8,000 - $30,000 /Set
Min.Order:1 Set
Zhangqiu Yulong Machine Co., Ltd.
The materials drying equipment introduction:
· name of the dryer :the hot wind stoved
· the structure :this drying machine is consisted of hot wind stove,screw feeder,buffer,blower,the pipes and cycl.
· the working process of the drying pellet equipment:the air flow is formed through the negative pressure of
blower, the materials enter into the pipe through the screw feeder, so that the hot wind and materials mix
together,
and the moisture is separated from the materials when passing the cyclone. At last ,the hot-wind stove makes
the materials drying.
· the application:biomass pellet,wood bark, blocks and coal (which are all can be used as fuel)
· the advantages:the dryer heats fast,start and stop convenient,without pressure and low cost.Compared to
traditional way,its investment saving is more than 40%, the maintenance cost is reduced by more than50%,
energy
saving more than 25%,drying and heating efficiency increase by more than 40%.
Introduction
Rotary Dryer is suitable for drying sawdust, organic material, chemical material and etc. This
type rotary dryer has advantage of high drying capacity, stable working performance,
low consumption and easy operation. The rotary dryer adopts air inhale device
to inhale the hot air from air-heating furnace to the inner of dryer to complete
heating change with wet material. According to the different character of material,
we use different type lifting plate and Anti-sticking measures. There are
multi-angle lifting style lifting plate inside of dryer;during drying, the lifting plate
will raising the material evenly, which can ensure the material complete heating
change with the hot air enough and also ensure the drying efficiency is good.
Technical Parameters
Technical Parameters
Introduction
The air-flow dryer is the latest drying equipment which our company has studied successfully.
It can dry the materials mainly using the hot wind produced by the hot-blast stove; the dryer is
applied to the material in dispersed state which contains high moisture humidity, such as the
saw dust, grain or straw.