TCP/IP RS485 Network Door Access Control Board with SDK Software for Access Control System
USD $33.4 - $98.17 /Set
Min.Order:1 Set
Shenzhen HSY Security Tech Co., Ltd.
HSY-02 TCP/IP RS485 Network Door Access Control Board with SDK Software for Access Control System
Introduction:
Access Systems are built on flexible, open technology to provide management, real-time monitoring , and control of your access control system—all from a browser, with no additional software to install. Our secure Web-hosted infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location. can communicate at Ethernet TCP/IP networks. It can store up to 10,000 cardholders.
2 Doors Control Features:
HSY-02 is now capable to handle 2 doors / 4 readers.
1. The Access Controllers fits any type of installations, up to 10,000 users, 30000 in and out records. from single buildings to multiple sites spread over remote locations and linked via TCP/IP.
2. The user-friendly Access software (B/S Structure or called ‘Browser Server’ Mode) programs the system within a few minutes, from a non-dedicated PC. Access Software provides numerous access control and alarm monitoring features: expiry date for clubs, automatic activation, interlock between two doors, time zones, supervision, anti-pass back, activity reports...
3. Each alarm input is programmable: operating mode (NO or NC), time zones, local reflex (activation of outputs according to input status). Specific alarms are triggered according to the number of unsuccessful attempts, the time limit for door closing (door alarm).
4. Whenever required, the data stored in the controllers is transferred to the computer and activity reports are printed. Each controller works independently and keeps its own database.
5. Visual LEDS (Four lights: Red, Green, Blue, Orange) indicate the inputs, outputs and communication status.
Two Doors Access Contorl System Spec:
Product Parameters: | |
Communication | TCP/IP |
PCB board size: | 160*110*28 mm |
User | 10,000 |
Event Buffer | 30,000 |
Power / Current | 220V, 50HZ input, 12V, 3A output |
Reader Port | 4ea (26bit Wiegand, 8bit Burst for PIN) |
Baud Rate | 38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable) |
Connect Reader | 4PCS |
Can control the gate output relay: | 2pair |
Open delay time: | 1-600 seconds adjustable |
LED Indicator | Yes, LED indication for communication, power, status and punch card |
Operating Temperature | 0°to +55°C |
Operating Humidity | 10% to 80% relative humidity non-condensing |
Certification | CE, FCC |
Two Door Access Contorl System photos:
Optional metal case power supply:
Wire diagram:
Attention:
1. Wiring standard:
Even the connection distance is very short, is must be implemented according to the following requirement
2. 220V AC power cable:
Three- wire power supply,the cross-sectional area 1.0 square or more.It's required that power supply must be grounded to prevent from power interference
3. The line of electric lock to controller:
It's recommended to use two-wire power line,the cross-sectional aera 1.0 square or more. if the distance over 50meter,it's considered to use thicker line or multiple paraller.
4. TCP/IP communication line: Network cable
5. The card reader, door sensor and button line:
Can use network cable or others.
Setting shows:
Company & Certification :
Why choose us ?
Dears customer,
Thanks for your visiting our products.
Need more spec or any questions,pls freely to contact us,We will reply promptly.
Best regards