Security System Free Software and SDK Wiegand Network Access Control Board manufacturer in China

Access Systems are built on flexible, open technology to provide management, real-time monitoring ,

and control of your access control system—all from a browser, with no additional software to install.

Our secure Web-hosted infrastructure and centralized online administration reduce your IT costs and

allow you to easily manage all of your access points in a single location. can communicate at

Ethernet TCP/IP networks.

It can store up to 10,000 cardholders.  

Features :

HSY-01 is now capable to handle 1 door / 2 readers.   

HSY-02 is now capable to handle 2 door / 4 readers.  

HSY-04 is now capable to handle 4 door / 4 readers and 4 buttons.  

1. 10000 cards and 30,000 offline records.

2. Wiegand input metal case power supply.

3. Have SDK and software.

4. Support password mode, realizing card and password double authentification.

5. Data memory function, back-up battery can ensure the terminal working without power.

6. Web base( Browser/ server ) software with complete.

7. Basic function setting : Door Sensor Alarm, first card setting, time one, double door

linkage, threaten password, door often-open status setting, anti-pass back, electronic

map, remote control real time monitor.

Access Control Board Specification:

Access Control Board photos: 

HSY-01: 

HSY-02:

HSY-04:

Optional metal case power supply:

Wire diagram:

Attention:

1. Wiring standard:

      Even the connection distance is very short, is must be implemented according to the

 following requirement

2. 220V AC power cable:

      Three- wire power supply,the cross-sectional area 1.0  square or more.It's required that

power supply must be grounded to prevent from power interference

3. The line of electric lock to controller:

    It's recommended to use two-wire power line,the cross-sectional aera 1.0  square or more.

 if the distance over 50meter,it's considered to use thicker line or multiple paraller.

4. TCP/IP communication line: Network cable

5. The card reader, door sensor and button line:

       Can use network cable or others. 

Operator Manual shows:

Operator Management:

System Setting:

TCP/IP Mode Setting:

RS485 Mode Setting:

Attendance Management Setting: