Specifications
DM500HD satellite receiver
*DVB-S/S2/C+ Linux system
*400 MHz Processor+2*USB
*Dreambox500 HD PVR Sim 2.10
Hot! Dm500HD receiver and dreambox500 HD dm500hd pvr
Product Description:
- 400 MHz MIPS processor
- Linux Operating System
- 2 x LED - display
- MPEG-2 / H.264 Hardware decoding
- Tuner: DVB-S2
- 1 x Smart Card Reader (Dreamcrypt CA)
- Service Mini-USB
- 10/100Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- HDMI
- 2 x USB 2.0
- analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 64 MByte Flash, 256 MByte RAM
- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Teletext Decoder
- External 12V power supply
Technical Data DBS-Tuner DVB-S2:
- Frequency Range: 950-2150 MHz
- Demodulation: DVB-S (QPSK) / DVB-S2 (8PSK,QPSK)
- Symbol rate DVB-S: 2-45 Mbaud/s, SCPC / MCPC
- DVB-S2: 10-31 Mbaud/s (8PSK), 10-30 Mbaud/s (QPSK)
Video decoder:
- Video Compression MPEG-2 and MPEG-1 compatible, H.246
- Video Formats 4:3 / 16:9
- Letterbox for 4:3 TV-Device
Audio decoder:
- Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
- Audio Mode Dual (main/sub), Stereo
- Frequency: 32kHz, 44.1kHz, 48kHz, 16kHz, 22.05kHz, 24kHz
Output analog:
- Output Level L/R 0,5 Vss on 600 Ohm
- THD > 60 dB (1 kHz)
- Crosstalk < -65 dB
Output digital:
- Output Level 0,5 Vss on 75 Ohm
- Sampled Data Filtering 32kHz, 44.1kHz, 48kHz
- S/PDIF-Output optical, Toslink
Video output:
- Output Level 1 Vpp + / - 0.3 dB on 75 Ohm
Video parameter:
- Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
- Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
- Output: FBAS, RGB, S-Video
Ethernet:
- 10/100 MBit compatible interface
- Function: Update of Firmware
Analoge modem:
- analoge modem for Internet connection
LNB power and polarisation pertuner:
- LNB Current 500mA max.; short-circuit-protected
- LNB Voltage vertical < 14V no load, > 11,5V at 400mA
- LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
- LNB shut-off in standby mode
Number of active satellite position:
- DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control
Power consumption:
- < 12W at 12V operation
- < 1W Standby
External power supply:
- Input:110-240V AC / 50-60Hz / 0,6A
- Output:12V = / 3,0A
Physical specification:
- Ambient Temperature:+15 ° C to +35 ° C
- Humidity: < 80%
- Dimensions (W x D x H): 195 mm x 130 mm x 40 mm