Specifications

CCD-908B watch video instructions

        First, your use of the company's products thanks! Please read before using this manual, the proper use of this product. In order to better service, the contents of this manual may change. Because the product performance and functionality changes that occur will be without notice. 

First, the shape, button

1, USB interface, 2, microphones

3 , camera 4, switch machines, camera key

5, the time adjustment handle

6, camera, motion detection button

7, the status indicator

Second, Introduction

This product is the first high-definition digital camera and a watch camera, built-in memory, also known as "watch camera" can be shooting photos and high-definition screen, this product is simple, sleek, beautiful and practical , easy to carry, for business, education, security, media, justice, tourism, health, life and other areas of essential utilities, by the users of all ages.

Third, the operating instructions

1 shows the various components:

1.1, light shows: status indicator (Figure 7) share a light hole, take pictures when the blue lights flash once; conventional blue light flashing three times off camera lights; motion detection when Lamps flash three times off. Off a blue light flashing off light; charging, red light flashes, red light off a full charge.

1.2, Button Description: Touch the button (figure 4) for the startup, shutdown, and video. Touch of a button (Figure 6) for the camera, motion detection camera. Press the two keys to achieve reset (for the machine is not responding).

1.3 Description :2.5-4pin USB socket outlet (Exhibit 1), used to connect computer or charger, a data transfer, charging and external power supply interface.

1.4, microphone and camera: Microphone (Figure 2), used to pick up sound signals: camera (Exhibit 3), used to pick up video signals.

1.5, the time adjustment handle (icon 5): Time adjustment lever to adjust the watch time.

2, switch machines: short press the power button (figure 4) power, the camera starts the system initialization (in this case red and blue lights), the initial completed, the red light is off, long bright blue light, to enter standby mode. 3, the mode switch: the machine without the need for mode switching, directly through the keys into the appropriate mode.

4, camera mode: When the watch is turned off, press the power button, dual-lamp light, red light off after system initialization, long bright blue light, when the camera enters standby mode, short press the power button (icon 4), blue lights flashing, in order to save power, a total blinks three times, put out the lights, this time into the video camera has been among Among the camera, press the power button, a long bright blue light, then save the file and stop recording and return to standby mode. To better protect Jian file, camera every five minutes to save a file. Note: The video camera for the cycle, save the file to be saved before, to avoid being behind the file to overwrite. 5, camera mode: In standby mode, short press the camera button (Figure 6) that the photographs, each a short time the camera button (figure 4), blue light flashes once and store a photograph back to camera standby mode.

6, motion detection camera: In standby mode, long press the camera button (Figure 6) that enter the motion detection camera. Two lights blink, in order to save power, a total blinks three times, two lights go out, this time the camera has entered a motion detection camera. In the motion detection camera, when there are moving objects in the camera range, that is on camera, camera range when the object left after the pause, wait for the next appearance of moving objects, will once again start the video again and again. This can greatly save disk space. Note: The video camera for the cycle, save the file to be saved before, to avoid being behind the file to overwrite.

7, a removable disk: The unit is equipped with a USB extension cable, connect the machine's USB port (Exhibit 1), then the other end connected to the USB port on your computer, then the computer will pop up a removable disk logo, you can also be in the "My Computer" to find the "Removable Disk" icon. When the unit is connected to a computer, the computer as a removable disk drive has started to work, you can easily see through the computer, transfer, copy, delete files. The machine image file entries are: * Disk _DCIM 100DSCIM. Need to uninstall this product, please click on the bottom right corner of the taskbar icon for mobile devices, unloading inside the removable storage device can be safely pulled out until the system recognizes the hardware, then disconnect the machine from the computer Note: Depending on the configuration computer or system differences, identify the removable disk will be slightly different, please be patient during this period is best not to operate the camera, so as not to impact on the computer to recognize the hardware, if time is not recognized to a removable disk, please try again inserted, if still does not recognize the hardware, make sure that your operating system, drivers, USB interface cable is the things normal; in order to avoid the machine or computer damage, please strictly in accordance with specifications to connect, uninstall the machine, the connection must be used when the supplied USB extension cable to connect the unit's USB port (Exhibit 1), and then connected to the computer's USB port, unloading, when prompted to "safely remove the device from the system", the first break On the computer side of the USB, and then disconnect the machine connected to USB.

8, the computer network camera features: First, you must install on your computer CD-ROM that comes with the camera driver. The supplied CD into your computer CD drive, run the CD in the STK02N 2.4.exe to install the camera driver, installed the camera driver, ready to use a computer camera. Nearly live camera button (Figure 6), connected computer, the unit enters the PC Camera (webcam) mode, in this mode, you can easily video chat with friends, shooting emoticons, and so on. Open the webcam screen: Double-click My Computer →                          . (Note: The USB connection confidential in the boot to enter the web camera function)

in order to avoid damage to the machine or computer, please connect in strict accordance with specifications, unload the machine must be connected with the random the supplied USB extension cable to connect the machine's USB port (Exhibit 1), and then connected to the computer's USB port, unloading, when prompted to "safely remove the device from the system", first disconnect the computer side of the USB, and then disconnect the machine connected to USB.

9, charge: Connect your computer USB port or charger to recharge the camera when the battery is charging, the red light flashes when the battery is fully charged, the red light is off: Note: The camera built-in high-capacity polymer lithium battery, no memory effect, can be used with the charge, but the initial use of the first five, and then charge the battery to run out of saturation, in order to activate the battery maximum capacity, access to standard working time. In order to maximize the battery storage capacity per charge when fully charged, the LED indicates the charging continued after 30 minutes to 60 minutes. In order to avoid damage to the machine or computer, please connect in strict accordance with specifications, unloading the machine, must be used when connecting the supplied USB extension cable to connect the unit's USB port (Exhibit 1), and then connected to the charger, the computer the USB port, unloading, when prompted to "safely remove the device from the system", the first disconnect the charger or the computer side of the USB, and then disconnect the machine connected to USB.

10, time to change: the camera provides a video recording time display function, you can set the time according to actual needs, the time format on the. Days hours: minutes: seconds. Set as follows to connect the computer to find the removable disk, the disk space in the right-click the mouse to move the pop-up menu on the "New" → "Text Document" to the document named "time" (the letters must be lowercase) it's extension ". txt". You can also desktop built in accordance with the method described above, such a folder and then copied to the disk folder. Time to open a folder, set the time format such as: 2000.01.01 00:00:00, year, month, day and hour, minute, seconds, separated by spaces. Then save. After the files are saved safe exit hardware, power, time set. After time setting, video files and your time on the time set to the. Note: Time must be set up after the power came into effect. 11, exception handling: camera storage space is insufficient, while in the green and red flashes for about 3 seconds, automatically save the current image file and shut down, if you want to continue using the camera, the image you want in a backup computer files, and Remove the memory of the old files to free up enough storage space. Camera batteries are low, it will flash a red light about 3 times, automatically save the current image file and shut down, if you want to continue using the camera for charging before use. Improper operation of the camera due to accidental or other special reasons to stop responding at the same time press the Enter key (Figure 6) and power button (figure 4), first loosen the machine key (figure 4) turn the power off, reboot and then use. Can not boot: batteries are charged, please charge; the same time press the Enter button (Figure 6) and power button (figure 4), first release the machine key (figure 4) turn the power off, reboot. No video: the memory card is too much bad files, format the disk before use. Not associated computer: Make sure your operating system, drivers, USB interface cable is the things normal.

 2013 NEW DESIGN 1280*720 watch video mini hidden watch camera