Application:

Design and Debug

Circuit function test

Mixed signal circuit test

Identified signals logic information

Education & Training

Specification:

Bandwidth: 60MHz

Sample rate(Real time) : 500MS/s

Horizontal Scale(S/div): 5ns/div-100s/div, step by 1-2-5

Rise time (at input, typical): ≤5.8ns

Channels: Dual

Display: 8" color LCD,TFT display,800x600 pixels,65535 colors

Dimension :340mmx155mmx70mm

Weight: 1.8kg

Vertical System

Vertical resolution (A/D): 8 bits Resolution (2 channels simultaneously )

Vertical sensitivity: 2mV/div-10V/div(at input)

Displacement: 10div(5mV-10v)

Analog Bandwidth: 60MHz

Single bandwidth: Full bandwidth

low frequency: ≥5Hz

Rise time (at input, typical): ≤5.8ns

DC gain accuracy: ±3%

DC accuracy(Average): Average 16: (3% rdg + 0.05 div) for ΔV

Measurement

Cursor measurement: ΔV and ΔT between cursors

Automatic measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time,Fall Time, DelayA→B , DelayA→B , +Width, -Width, +Duty, -Duty

Waveform Math: +, -, , / ,FFT

Waveform storage: 15 waveforms

Lissajou’s figure: Bandwidth   Full bandwidth

                                 Phase difference: ±3 degrees

Communication interface: USB, support USB flash disk storage USB, SVGA

Trigger

Trigger level range: ±6 divisions from screen center

Trigger level accuracy: ±0.3div

Horizontal Trigger displacement: Pre-trigger: 655 div,Post-trigger: 10 div

Trigger Holdoff range: 100ns~10s

Edge trigger: Rising,Falling

Pulse Trigger: Trigger condition   Positive pulse: >, < , = negative pulse: >, < , =

                           Pulse width range    24ns~10s

Video Trigger: NTSC,PAL,SECAM

Slope Treigger: Trigger condition   Positive pulse: >, < , = negative pulse: >, < , =

                             Pulse width range    24ns~10s

Alternate Trigger: Edge, Pulse, Video, Slope

Waveform record

Waveform: quantity: 1~1000

Interval time : 1ms~1000s

Display: 8" color LCD,TFT display,800x600 pixels,65535 colors

Power Supply: 100-240 VAC RMS, 50/60Hz, CAT II

Power comsumption:  <18W

Dimension: 340mm(L)×155mm(H)×70mm(W) 1.8kg (without battery)