3.7 inch TFT Handheld Digital Multimeter&Dual Channels Digital Oscilloscope/(60MHz)
Negotiable /Piece
Min.Order:1 Piece
Xiamen KANGPUT Electronics Technology Co., Limited
3.7" TFT handheld digital multimeter&dual channels digital oscilloscope/(60MHz)
Model: HDS2062M-N
Main Features
1. Autoscale
2. 20 Automatic Measurements
3. 3 in 1(DSO+Multimeter+Cymometer)
4. Bandwidth: 60MHz
5. Support USB for data transmission to PC
6. Replaceable li-ion battery back up (6 hours)
7. USB Flash Disk Storage
8. Waveform Record & Replay
9. FFT
Application
Design and Debug
Circuit function test
Education
Technical training
Maintenance testing
Menu language: English/Chinese
Manual language: English
Model | HDS2062M-N |
Bandwidth | 60MHz |
Sample rate(Real time) | 250MS/s |
Horizontal Scale(S/div) | 5ns/div~100s/div,step by 1~2~5 |
Rise time(at input,typical) | ≤5.8ns |
Channels | Dual |
Display | 3.7 inch color display with TFT panel(640×480 pixels) |
Dimension | 180mm(L)x115mm(H)x40mm(W) |
Weight | 645g |
Oscilloscope Specification | ||
Input impedance | 1MΩ±2%,in parallel with 20pF±3pF | |
Record length | Max. 6000 points on each channel | |
Interpolation | (sin x)/x | |
Probe attenuation factor | 1X,10X,100X,1000X | |
Input coupling | DC, AC, GND | |
DC accuracy(Average) | Average>16:±(5% reading+0.05div) for V | |
Vertical Sensitivity | 5mV/div~5V/div (at input) | |
Vertical resolution (A/D) | 8 bit(2 channels simultaneously ) | |
Max. Input Voltage | 400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1) | |
Trigger Type | Edge, Video, Alternate | |
Trigger Mode | Auto, Normal, Single | |
Trigger level | ±6 divisions from screen center | |
Acquisition modes | Sample, Peak Detect and Average | |
DC gain accuracy | ±3% | |
Automatic Measurement | Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width, Overshoot,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B,Delay A→B | |
Waveform math | +, -, ×, ÷, FFT | |
Waveform storage | 4 waveforms | |
Lissajou’s | Bandwidth | 60MHz |
Phase difference | ±3 degrees | |
Communication interface | USB | |
Power supply | 100V-240V AC, 50/60Hz | |
Li-ion battery | 7.4V, 6 hours operation |
Multimeter specifications | |
Full scale reading | Diode 0V-1.5V |
Input Impedance | On/Off measurement<50(±30)beeping |
Capacitance | 51.2nF-100uF:±(3%±3 digit) |
Voltage | VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 1000V, VAC:4V,40V, 400V:±(1±3digit) |
Current | DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit) |
Impedance | 400Ω:±(1%±3digit), 40Ω |
General specifications | |
Interface | USB Data Cable (Transfer waveform data to a PC) |
Power | Supply:100V~240V AC,50/60Hz DC input: 8.5VDC, 1500mA Battery: 6 hours |
Dimension | 180mm x 115mm x 40mm |
Weight | 645g |
Your Success is Our Business!!