HDMI HD1080p Full D1 DVR with 8 SATA interfaces
Negotiable /Piece
Min.Order:1 Piece
Shenzhen Bellsent Technology Co., Ltd.
Specifications | |||
Video and audio input/output parameters | |||
Analog Video Input | 8ch, BNC interface (electrical level: 1.0Vp-p, impedance: 75Ω), PAL/NTSC self-adaption | ||
Audio Input | 8ch, BNC interface (electrical level: 2.0Vp-p, impedance: 1kΩ) | ||
CVBS Output | 2ch, BNC interface (electrical level: 1.0Vp-p, impedance: 75Ω) | ||
Resolution: PAL: 704*576, NTSC: 704*480 | |||
HDM Output | 1080P | ||
Audio Output | 2ch, BNC interface (linear level, impedance: 600Ω) | ||
Voice Intercom | Support | ||
Video and audio coding parameters | |||
Video Frame Rate | PAL: 25fps NTSC: 30fps | ||
Video Bite Rate | Image quality adjustable, VBR and CBR optional | ||
Stream Type | Composite stream | ||
Video Coding Resolution | PAL:200 fps @D1 | ||
Video and Audio Compression Standard | H.264/G.711 | ||
Dual Stream | support | ||
Synchronous Return Visit | Support 8ch (simultaneous encoding and decoding, full real-time) | ||
Preview Display | Support auto loop, PIP display, electronic amplification | ||
Recording Management | |||
Video Mode | Booting automatic continuing, timing record, motion detection, alarm trigger and remote client recording | ||
Video Preservation Preservation | Local hard disk, network backup | ||
Backup | Support USB flash disk/Mobile HDD backup, USB recorder backup and network backup | ||
HDD Drive | |||
Type | 8 SATA interfaces | ||
Maximum Volume | Each interface support max 2TB | ||
Network | |||
Network Function | Support mobile surveillance, real-time network monitoring, remote DVR parameter Setting
| ||
Network Protocol | Support TCPIP/ UDP/DHCP/DDNS/PPPoE etc. protocol | ||
external interface(with IR remote control ) | |||
Network interface | 1*RJ45 10M/100M self-adaptive Ethernet interface | ||
Serial Interface | 1*standard RS-485 serial interface, support PELCO-P and PELCO-D protocol | ||
1* large keyboard 485 interface | |||
1* large keyboard 485 interface | |||
USB Interface Interface | 2* USB 2.0 | ||
Alarm Input | 8ch | ||
Alarm Input | 4ch | ||
Other | |||
Power Supply | AC 100~240V/6.3A, 50~60Hz | ||
Power Consumption | 12-27W (without hard disk and load) | ||
Working Temperature | 0°C~+55°C | ||
Working Humidity | 10%--90% | ||
Chassis | 2U chassis | ||
Dimension | 440 x460x89mm |