Product Details

Hot Dipped Galvanized Gabion Basket| Gabion Mesh| Gabion Box

(1) Aperture of gabion box: 60x80mm 80x100mm 80x120mm 100x120mm 120x150mm

(2) Wire Diameter of gabion mesh:

1. Mesh wire diameter range: 2mm-4mm 2. Edge wire diameter range: 0.5mm-1mm 3. Binding wire diameter range less than mesh wire, in 2.2mm generally.

(3) Wire tensile strength: not less than 38kg/m2, 380N/mm.

(4) Surface Treatment:

1. Electro galvanized, zinc coating is Max. 10g/m2, with bad performance of anti-corrosion

2. Hot-dip galvanized Zinc coating is Max. up to 300g/m2, with better performance of anti-corrosion

3.Galan (zinc-aluminium alloy), including zinc-5% Al mixed rare earth alloy wire and Zinc-10% Al mixed rare earth alloy wire, the best performance of anti-corrosion 4. PVC coated, PVC coating is 1.0mm generally.

(5) Diaphragm: 1 diaphragm every 1 meter is located in the direction of length of gabions.

(6) Dimension: 2mx1mx1m, 3mx1mx1m, 4mx1mx1m, 2mx1mx0.5m, 4mx1mx0.5m,offer sizes as per clients' requirements.

(7) Characteristic: economy, easily to be installed, A strong performance of withstanding natural damage, corrosion resistance, good permeability, stacked to save transportation cost.

Mesh

opening

(mm)

Wire diameter

(metal wire)

(mm)

Wire diameter

(PVC coated Inner

and Outer wire)

(mm)

Strands

Size

LengthxWidthxHeight

(m)

60X80

φ2.0-2.8

φ2.0/3.0-2.5/3.5

1. 2mx1mx0.5 m;

2. 2mx1mx1 m;

3. 3mx1mx1m;

4. 4mx1mx1m;

5. 4mx1mx0.5m.

80X100

φ2.0-3.2

φ2.0/3.0-2.8/3.8

80X120

φ2.0-3.2

φ2.0/3.0-2.8/3.8

100X120

φ2.0-3.4

φ2.0/3.0-2.8/3.8

100X150

φ2.0-3.4

φ2.0/3.0-2.8/3.8

120X150

φ2.0-4.0

φ2.0/3.0-3.0/4.0

Gabion Basket
Nominal Dimensions			Number of Cells	Capacity (m³)	Units/Bundle
Length (m)	Width (m)	Height (m)			Zinc	PVC
1,0	1,0	1,0	1	1,0	74	64
1,5	1,0	1,0	1	1,5	74	62
2,0	1,0	1,0	2	2,0	44	38
3,0	1,0	1,0	3	3,0	32	26
4,0	1,0	1,0	4	4,0	24	20
2,0	0,5	0,5	2	0,5	100	80
2,0	1,0	0,5	2	1,0	60	50
3,0	1,0	0,5	3	1,5	40	34
4,0	1,0	0,5	4	2,0	32	30
Binding Wire: Sufficient wire is supplied for lacing and bracing operations.
Tolerances: Height, Width : ±5%; Length : ±10%