Specifications

Welded brick mesh
1.Material: galvanized
2.Opening:1/4"~4"
3.Width:0.3m~2.5m
4.ISO9001

Galvanized Steel Welded Brick Mesh  from Anping

 

 

Reinforced brickwork is preferable to un-reinforced brickwork in all types of buildings. When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground).

Advantages:

 

It is expanded steel mesh with continuity of steel.

It has no joints, welds or interweaving to fail under stress.

The mesh is anchored immovably so that the reinforcement cannot slip under tension.

This is the only type of brickwork reinforcement to give such a unique combination of all these

 

Technical: expanded and welded

 

Specification:

 

 

Ref No	Coil Width & Length	Thickness (mm)	Material
BRM 1 (GI) - 21/2" x 72'	65mm x 22m	0.35	Pre-galvanized steel
BRM 1 (GI) - 4" x 72'	100mm x 22m	0.35	Pre-galvanized steel
BRM 2 (GI) - 21/2" x 80'	65mm x 24.4m	0.50	Pre-galvanized steel
BRM 2 (GI) - 41/2 x 80'	113mm x 24.4m	0.50	Pre-galvanized steel