Product Details

Specifications

1.channel steel
2. joist steel
3.flat steel
4.square steel and round steel etc

.square steel and round steel etc

model	W24S-140 Section Bending Machine
Max. ant-bending section modulus of profile	140
yield limit of profile	σs=245MPa
Angel steel inflection	Max section	14014016mm
	Minimum bending diameter	2400mm
	Minimum section	50505mm
	Minimum bending diameter	1000mm
Angel steel excurvation	Max section	15015016mm
	Minimum bending diameter	2200mm
	Minimum section	50505mm
	Minimum bending diameter	1000mm
Channel steel excurvation	Channel steel type	30mm
Channel steel excurvation	Minimum bending diameter	1200mm
Channel steel inflection	Channel steel type	30
Channel steel inflection	Minimum bending diameter	1200mm
Flat steel vertical bending	Max section	150*40mm
Flat steel vertical bending	Minimum bending diameter	1500mm
Flat steel plane-bending	Max section	280*50mm
Flat steel plane-bending	Minimum bending diameter	1300mm
Steel pipe bending	Max section	Φ168*6mm
Steel pipe bending	Minimum bending diameter	2000mm
round steel inflection	Max section	100mm
round steel inflection	Minimum bending diameter	1200mm
square tube inflection	Max section	125×10mm
square tube inflection	Minimum bending diameter	2500mm
Bending speed	4 m/min
Climb and Fall velocity of side roll	180-200 mm/min
pressure of hydraulic system	19.5MPa

This machine can be expected to complete the pre-bending, roll round and round school process. The two machines under the main drive roller, can also work in three main drive roller roller, the roller position is fixed, the two side rollers rotating arc movement around a fixed center movements, hydraulic control, displacement of liquid crystal display, showing accuracy of 0.1mm. It is conducive to forming process control; both sides of the device has a roller, which will help to ensure that non-symmetrical cross-section happen. advanced technology, feature-wide, also can put horizontally and vertically.

Three work roll are major pinch roll, two side roll can make arc vertical movement around fixed center of gyration, There are roll-lift device on the both sides of work roll which can assure the quality of asymmetry section bending profile. This machine is advanced profile equipment currently at home and abroad with advance structure and reliable operation. Advance structural general or special mold can be configured by the machine, this machine is with convenient operation, high efficiency and great popularity.

Half hydraulic and hydraulic bending machine are famous for its good quality and advanced technology. It is convenient to use

Profile bending machine is a new kind of bending equipment which is introduced from Italy

technology by our company, by changing different mold, this machine can bend various kind of

steel profile such as angel steel, channel steel, joist steel, flat steel, square steel and round steel.

This machine can complete circle-rolling and circle-checking procedures at one time which are widely used in oil industry, chemical industry,

hydropower, shipbuilding industry and machinery manufacture industry.

New Products

W24S pipe bender ,square tube bending machine,angle bending machine
USD $15,000 - $20,000 /Set

1 Set(MOQ)
pipe bending machine,tube bending machine,tube rolling machine
USD $80,000 - $90,000 /Set

1 Set(MOQ)
pipe bending machine
USD $40,000 - $60,000 /Set

1 Set(MOQ)
W24S-100 profile rolling machine
USD $14,800 - $30,000 /Set

1 Set(MOQ)
W24S-100 tube rolling machine
USD $15,000 - $30,000 /Set

1 Set(MOQ)
flat bar rolling machine,fabric rolling machine,tube bending machine,square tube bending machine
USD $80,000 - $90,000 /Set

1 Set(MOQ)

metal rolling machine
USD $80,000 - $90,000 /Set

1 Set(MOQ)
W24s series flat bar rolling machine
USD $12,500 - $90,000 /Set

1 Set(MOQ)
W24S-45 profile rolling machine
USD $20,000 - $30,000 /Set

1 Set(MOQ)
tube bending machine
USD $40,000 - $60,000 /Set

1 Set(MOQ)
pipe bending machine
USD $40,000 - $60,000 /Set

1 Set(MOQ)
SECTION BENDING MACHINE,TUBE ROLLING MACHINE
USD $30,000 - $30,000 /Set

1 Set(MOQ)

W24S-45 profile rolling machine,pipe rolling machine
USD $20,000 - $80,000 /Set

1 Set(MOQ)
W24S-45 profile rolling machine
USD $20,000 - $80,000 /Set

1 Set(MOQ)
manual sheet metal rolling machine
USD $20,000 - $190,000 /Set

1 Set(MOQ)
iron sheet rolling machine
USD $30,000 - $70,000 /Piece

1 Piece(MOQ)
cone rolling machine
USD $30,000 - $60,000 /Piece

1 Piece(MOQ)
CNC plate bending machine
Negotiable /Piece

1 Piece(MOQ)

heavy type plate rolling machine
USD $200,000 - $500,000 /Piece

1 Piece(MOQ)
rolling pipe bending machine
USD $120,000 - $150,000 /Piece

1 Piece(MOQ)
plate rolling machine price
USD $150,000 - $275,000 /Piece

1 Piece(MOQ)
plate rolling machine
USD $20,000 - $50,000 /Set

1 Set(MOQ)
Used Steel Rolling Machine For Sale
USD $275,000 - $300,000 /Piece

1 Piece(MOQ)
3 roll bending machine
USD $40,000 - $100,000 /Piece

1 Piece(MOQ)