Specifications

Capacity: 50-60pcs/h
Material: PC
Max general power: 91.7KW
Average consumption: 45KW
Size of machine: 5.3M*2.7M*4.5M

General introduction:

This 5 Gallon PC Bottle Extrusion blow molding machine  is one of the highest popularity, well-known to many customers over the world for its excellence and utility. The feature of the Extrusion blow molding machine is as follows:

1. It adopts extrusion blow molding craft structure, which is efficient and quick; 30:1 and 25:1 extrusion system and large die head are available to meet different requirements.

2. The clamping system adopts two tie bar type clamping device with gears and racks synchronously aligned;

3. Cylinder clamps mold by direct pressure;

4. The Extrusion blow molding machine adopts one-piece mold platen with X-shape pull arms to increase the bearing rigidity of mold platen; the bevel angle of pull arms is 45 degree, and the area for mold is large;

5. The extrusion system adopts frequency control of motor speed, and the amount of extrusion is large;

6. This kind of Bottle Extrusion blow molding machine adopts PLC programmable controller made by Panasonic of Japan, of which programs are optimized and all electric equipments adopt world-famous products.

7. This PC 5 gallon bottle Extrusion blow molding machine is specially designed to produce PC purified water barrels, and it can also applied to produce lampshade, bottle, pot, tank, barrel and many other blow molded products that are made of PC raw material.

 

Specifications:

Model No.	Unit	82PC(one step)
Material		PC
Output	pcs	50-60
Max. Product Volume	L	25
Dry cycle	pc/h	360
Screw Diameter	mm	82
Screw L/D ratio	L/D	25
Screw drive power	KW	37
Screw heating capacity	3φKW	34
No. of heating zone	ZONE	4
Plasticizing capability	kg/h	70(PC)
Accumulator volumes	L	1.5
Oil pump drive power	KW	45
Clamping force	KN	210
Mold stroke	mm	330-780
Bottom blowing lifting stroke	mm	150
Blowing pin lifting stroke	mm	125
Max. Size of Mold	W×Hmm	500*600
Max. Die diameter	mm	150
Die heat capacity	3φKW	8.7
No. of heating zone	ZONE	3
Blowing pressure	Mpa	0.8
Air volume	M3/MIN	1.0
Cooling water pressure	Mpa	0.3
Water consumption	L/MIN	15
Max general power	KW	91.7
Average consumption	KW	45
Size of machine	L×W×Hm	5.3×2.7×4.5
Weight of machine	TON	11

 

Pictures: