Specifications

13.2KV single phrase distribution transformers are also suitable for light and diversified power applications.

13.2KV single phrase distribution transformer  detailed information 

Summarization:

Offer 2 basic transformer types and 2 kind metal core type conventional type and complete self protecting type. And for the transformer core, 2 type materials are available: C.R.G.O wound core and amorphous metal core.

Standards:

IEEE C57.12.00    IEEE C57.12.20

ANSI C 57.12.00   IEEE C57.12.20   IEC 76   GB10318

Feature of outer structure:

 1.       Cover mounted high voltage porcelain bushings with eyebolt terminals are mounted on flat embossments on the cover and have undercut gasket seats for improved sealing.  The eyebolt connectors are cast bronze plated with tin to accommodate both aluminum and copper conductors.

2.        One –piece fasten ring prolongs the life of the transformer, facilitated inspection and maintains even pressure around the entire rim, it combines with a specially formed tank rim, draw cover and gasket to form an effective seal which will not deteriorate with age.

3.        Low voltage tank-wall bushing terminals are clamp type and tinplated.

4.        Tank is equipped with self-sealing pressure release device.

5.        Support lugs, welded to the tank, conform to ANSI standards are made of hot-rolled steel.

6.        Tank is supplied with a tank grounding bolted ring-type connector suitable for use with copper or aluminum.

Conventional type:

The transformer is cylinder sealing structure. Each one is fixed with grounding devices, hooks, support lug which conform to ANSI standard, and one or two high voltage bushing on the cover, low voltage bushing on the wall of the tank and eyebolt connecting terminals. High voltage taps should be connected when the power is cut off.

Complete self-protected type:

This transformer is complete self-protected type. Which can protect itself from thunder and lighting, short circuit and protect the transiting and distribution line from current failure because of self-malfunction.

Except from some similarities such as: cylinder tank, hooks, lifting lugs, grounding devices, nameplates core and winding with conventional type. This type of transformer has characteristic and devices as follows: one or two high voltage bushings in which there is fuse:

One or two arresters, on the wall of the tank, whose top end is near to the high voltage bushing, and connected to the bushing by copper strip;

One secondary breaker switch above the winding inside tank, and here are operating handle, overload reset and signal light. Low voltage bushing induced from the wall of the tank, grounding device is fixed to position X2.

Core: C.R.G.O core and amorphous metal core can be chosen.

5-50KVA

Technical data for D11 series single-phase pole-mounted distribution transformer (C.R.G.O core)

Type	Rated (KVA)	HV     (V)	Tapping (%)	LV   (V)	Loss (W)		Dimension(mm)					Weight(kg)
					No-load loss	Full-load loss	A	B	C	D	E	Oil weight (kg)	Total weight (kg)
D11-5	5	13200/ 7620 Or 11000 /6350	±2 X 2.5% or 0	120 /240 /480 or 120-240 240-480	29	95	830	430	510	340	286	15	92
D11-10	10				46	121	910	470	550	380		22	150
D11-15	15				58	215	970	500	580	410		30	210
D11-25	25				82	295	1025	550	630	520		45	258
D11-37.5	37.5				110	400	1225	630	680	520		50	340
D11-50	50				140	490	1235	630	680	520		62	395
D11-75	75				275	670	1300	680	720	550	591	88	480
D11-100	100				445	881	1350	780	810	610		94	530
D11-167	167				580	1400	1460	830	890	660		138	680
D11-250	250				550	1900	1570	960	950	660		250	990
D11-333	333				850	3500	1660	960	960	660		300	1660

Plant