Specifications

plastic injection machine

			HZT1000			HZT1500			HZT1680			HZT2000
ITEM			A	B	C	A	B	C	A	B	C	A	B	C
INJECTION UNIT	SCREW DIAMETER	mm	34	36	40	42	45	48	45	47	50	45	50	55
	SCREW L/D RATIO	L/D	21.2	18	20	21.4	20	18.8	20.9	20	18.8	22.2	20	18.2
	injection Volume	cm³	131	147	181	250	286	326	320	350	397	366	452	546
	Shot werght	g	119	134	165	227	261	296	291	320	360	333	411	497
	Plasticizing Capactiy	g/s	10.6	11.9	14.7	18	23	27	15.8	20	24.7	20	25	30
	injection Rate	g/s	81.2	92	113	115	130	145	127	140	157	126	155	187
	INJECTION PRESSURE	Mpa	180	160	130	183	159	140	170	155	137	207	168	139
	SCREW SPEED	Rpm	0-240			0-200			0-180			0-180
CLAMPING UNIT	CLAMP TONNAGE	KN	1000			1500			1680			2000
	TOGGLE STROKE	mm	310			390			420			470
	SPACE BETWEEN TIE BARS	mm	355*355			430*30			460*460			510*510
	MOULD Thickness(min-mar)	mm	150-360			150-450			180-500			200-520
	EJECTOR STROKE	mm	100			120			120			130
	EJECTORSTROKE	KN	33			38			38			70
	EJECTOR NUMBER	Piece	5			5			5			5
OTHERS	MAX.PUMP PRESSRUE	MPa	16			16			16			16
	PUMP MOTOR POWER	KW	11			15			15			18.5
	HEATER POWER	KW	5.7			9.3			9.3			12.5
	(LW H)MACHINE DIMENSION(LWH)	m	3.731.11.63			4.51.321.82			4.71.41.9			5.31.622.0
	MACHINE WEIGHT	T	3.5			4			5.3			6.5
	Mould Orentation Ring Diameter	mm	125			125			125			160