Stacker, buy Power Stacker -- RS1645 on China Suppliers Mobile

Product Details

The basic information of Power Stacker--RS1645

RS16 stand-on stacker is designed for a high turn round of goods in racking, when loading and unloading, as well as for the horizontal transport of goods up to 1600kg. Normal commercial pallets can be handled. The RS16 is also very flexible when used for order picking and as a working / lifting table.
Effortless power-assisted-steering
Powerful and economic with maintenance-free 3-phase AC drive motor
Lower life cycle costs
High capacity at high lifting height
Efficient and quiet hydraulics
Ergonomic operator cab
Long life control lever
Danfoss drive wheels
Danfoss controller
Hydraulic motor unit from Europe
This specification sheet according to VDI regulation 2198 only provides technical values for the standard stacker. Non-standard types, additional equipment,etc. could produce other values. Right reserved for technical changes and improvements.

RS16 Stand-on stacker

The specification of Power Stacker--RS1645

1KG=2.2LB 1INCH=25.4MM

Up to h3 mm	ACTUAL CAPACITY (Q) kg		ACTUAL CAPACITY EITH SIDE SUPPORT
2900	1600	1350	1600	1350
3600	1000	850	1200	1000
4000	800	650	1000	850
4500	600	500	800	650
5500			650	550
Load centre distance (C)mm	600	700	600	700

Mast table

1KG=2.2LB 1INCH=25.4MM

Designation	Closed mast height h1 mm	Free lift h2 mm	Lift height h3 mm	Extended mast height h4 mm
Two stage	2147	185	3200	3660
	2347	185	3600	4060
	2797	185	4500	4960
Two stage	2147	1660	3200	3680
(full free)	2347	1860	3600	4080
	2797	2310	4500	4980
Three stage	2240	1740	5000	5505
	2500	1960	5500	6040

1KG=2.2LB 1INCH=25.4MM

Characteris tics	1.1	Model of manufacture	unit	RS1632	RS1636	RS1645
	1.2	Power supply(electric,diesel, petrol,gas,mains electric)		electric
	1.3	Type of operation(hand pedestrian, stand on, rider seated, order picker)		stand on
	1.4	Capacity /rated load	QKg	1600
	1.5	Load center distance	Cmm	600
	1.6	Load distance	Xmm	765
	1.7	Wheelbase	ymm	1435
Weights	2.1	Weight(including battery)	Kg	1367	1392	1450
	2.2	Axle loadings laden drive end/load end	Kg	1290/1760
	2.3	Axle loadings unladen drive end/load end	Kg	1110/340
Wheels types	3.1	Tyres(rubber, Vulkollan, pneumatic, polyurethane)		rubber/polyurethane
	3.2	Tyre size drive end	mm	Φ254x82
	3.3	Tyre size load end	mm	Φ80x70
	3.4	Castor wheels(dimensions)		Φ150x60
	3.5	Wheels, number(x=drive wheel) drive end/load end		1x -1/ 4
	3.6	Track width(front) drive end	b10mm	635
	3.7	Track width(rear) load end	b11mm	395
Dimensions	4.1	Closed mast height	h1mm	See mast table
	4.2	Free lift	h2mm	See mast table
	4.3	Lift height	h3mm	See mast table
	4.4	Extended mast height	h4mm	See mast table
	4.5	Overhead load guard(cab)height	h6mm	2245
	4.6	Standing height	h7mm	230
	4.7	Height of steering wheel	h14mm	1255
	4.8	Fork height lowered	h13mm	85
	4.9	Overall length	l1mm	2035
	4.10	Length to front face of fork	l2mm	880
	4.11	Overall width	b1mm	978
	4.12	Fork dimensions	s/e/lmm	60/180/1150
	4.13	Fork carriage with	b3mm	645
	4.14	Overall fork width	b5mm	575
	4.15	Floor clearance under mast,laden	m2mm	25
	4.16	Working aisle with 800x1200 pallet lengthwise	Astmm	2246
	4.17	Outer turning radius	Wamm	1655
Performance	5.1	Travel Speed laden/unladen	km/h	8.8/9.2
	5.2	Lifting speed laden/unladen	mm/s	145/215
	5.3	Lowering speed laden/unladen	mm/s	260/270
	5.4	Gradeability laden/unladen	%	7/15
	5.5	Brakes		electric
Electric Motor	6.1	Drive motor	kw	3.0(AC)
	6.2	Lifting motor	kw	3
	6.3	Battery acc.to DIN 43531/35/36 A,B,C,no 1)		43531 B
	6.4	Battery voltage, norminal capacity K5 1)	V/Ah	24/360
	6.5	Battery weight	Kg	310
	6.6	Battery dimensions l/w/h 1)	mm	930/210/750
Other	7.1	Type of drive control		MOSFET Control AC
Other	7.2	Noise peak at operator’s ears	dB(A)	<70