Promotion Price Full electric scissor lift mode JCPTI
Negotiable /Set
Min.Order:1 Set
Shanghai Cheuk's Logistics Technology Co., Ltd.
The specification of Full electric scissor lift mode JCPTI
1KG=2.2LB 1INCH=25.4MM | |||
Model | JCPT8(Ⅰ) | JCPT9.5(Ⅰ) | |
Safe working load | kg | 450 | 400 |
Extended platform safe working load | kg | 112 | |
Outdoor use wind speed 45km/h | kg | 100 | |
Maximum working height | mm | 10000 | 11500 |
Maximum platform height | mm | 8000 | 9500 |
Overall length | mm | 2510 | |
Overall width | mm | 1150 | |
Overall height | mm | 2450 | |
Working platform size | mm | 2500X1120 | |
Platform extended size | mm | 1270 | |
Minimum ground clearance | mm | 120 | |
Wheel base | mm | 2080 | |
Minimum turning radius (inner wheel/ outer wheel) | mm | 1930/3740 | |
Drive motor | 2x24VDC/1.5kw | ||
Lifting motor | 24VDC/3kw | ||
Driving speed (furling state) | km/h | 4 | |
Lifting state | km/h | 1.1 | |
Lifting/ descending speed | sec | 70/60 | 89/88 |
Accumulator | 4x6V/250Ah | ||
Charger | 24V/25A | ||
Maximum gradeability | % | 35 | |
Working maximum allowable angle | . | 3 | |
Tyre | 406x125 | ||
Overall weight | kg | 2200 | 2280 |
Standard Configuration
Can bus line intelligent controller
Proportional controller
Automatic pot hole protection system
Charge lamp
Working chronometer
Strut bar for safe overhaul
Transport standard forklift hole
Electric circuit fault code display
Low voltage alarm
Emergency descending button
Extended platform
Charge protection
Horn
Tilt protection
Tilt alarm
Controller overtemperature protection
High capacity traction battery
Overload limit
4x2 drive
Optional Configuration
AC power source connected to platform
Strobe lamp