Product Details

Specification:

1. 100% raw material

2. 14 years experience

3. ISO 9001

4. OEM & ODM

5. Customized products are acceptable

Display of Tungsten Carbide Bar

Tungsten Carbide Bar is of wide application, especially for cutting.

Tungsten Carbide Bar with Different Sizes

Customized Tungsten Carbide Bar is available ! ! !

Tungsten Carbide Bar with Common Grades

Grade	Physical and Mechanical Properties			Recommended Applications
Grade	Density g/cm³	Hardness HRA(HV)	TRS Mpa	Recommended Applications
YG6X	14.8-15.1	91	1800	It's suitable for drawing steel wire, nonferrous metal wire and rods with diameter less than 6.0mm under low-stress condition.
YG6	14.7-15.1	89.5	1900	it's suitable for drawing steel , nonferrous metal and alloyed rods with diameter less than 20mm under low-stress condition. It is also suitable for drawing tubes with diameter less than 10mm.
YG8	14.6-14.9	89	2000	It's suitable for drawing and adjusting steel, nonferrous metal and alloyed rods and tubes. It's also suitable for making mechanical parts, tools and quick-wear part (such as nozzle, bearing point, guide means, upsetting die and perforating tool)…
YG15	13.9-14.2	86.5	2500	I't is suitable for drawing steel rods and tubes under high compression ratio. It's suitable for the upset forging, perforation presing tools working under high-press condition.
YG20	13.4-13.8	85	2600	It's suitable for making impact dies such as impact watch parts, spring lamination of musical instrument, impact battery case, toothpaste case die. It's suitable for punching dies of small size steel spherr, bolt and screw cap. It's suitable for pressure pad of hot rolling spiral drill.
YG20C	13.4-13.8	82	2600	Suitable for making coldheading dies, cold press dies used in standard part, brearing and tool industries. Also suitable for making punching dies of warhead and cartridge case.