6.5-0.7mm carbon steel wire drawing machine Supplier's Choice
USD $600 - $1,200 /Set
Min.Order:1 Set
Anping Tianyue Welded Wire Mesh Co., Ltd.
6.5-0.7mm carbon steel wire drawing machine
The wire drawing machine can draw the wire rod into thin wire.
Have the following kinds:
Conecting jar wire drawing machine
Big Water Tank wire drawing machine
Little Water Tank wire drawing machine
Double wire drawing machine because slippery wheel tubing drawing machine in the drawing process steel wire will produce the reverse phenomenon, so in the sliding wheel drawbench develops on the basis of the double tubing drawing machine. The machine has the advantages of pulley wire drawing machines,and eliminate the steel wire drawing in in the process of reverse phenomenon, steel wire in the drum of cooling effectiveness on the better. Double tubing drawing machine and slide wheel wire drawing machines, pushes more, especially on, under the intermediate line between rolling guide, make steel wire through it produces 180.
Type: | LW 1 -6/550 |
Description: | LW1-6/550 wire drawing machines, drived by gears, are capable of drawing rod wires of high-,medium-,low-carbon steel,copper,aluminium,ect.and appliable to manufacturing industries such as wood screw,nail, conducting wirerope for electrician use,spring,etc. With electrical control,this kind of machine is safe in operation,low in noise,and high in effciency. |
Specifications: | Specifications: Modle: LW1-6/550 |
Technology Parameters from 6.5 to 3.7mm:
Technology Parameters from 3.7 to 2.0mm:
Technology Parameters from 2.0 to 0.7 mm: