Product Details

Specification:

1. 100% raw material

2. 14 years experience

3. ISO 9001

4. OEM & ODM

5. Customized products are acceptable

Display of Tungsten Carbide Mold Making

Customized Tungsten Carbide Mold Making are available!

Tungsten Carbide Mold Making with Common Grades

Grade	Physical and Mechanical Properties			Recommended Applications
Grade	Density g/cm³	Hardness no less than HRA(HV)	TRS Mpa	Recommended Applications
YG6X	14.8-15.1	91	1420	For drawing steel and nonferrous wires or bars of less than Dia.6.00mm under not so much stress.
YG6	14.7-15.1	89.5	1520	For drawing steel , nonferrous alloy bars of less than Dia.20.00mm under more stuess and also for drawing tubes of less than Dia.10.00mm.
YG8	14.6-14.9	89	1470	For drawing steel and nonferrous bars and tubes, Also for manufacturing mechanical parts, tools and wear parts.
YG8C	14.5-14.9	88	1710	Suitable set of percussive and rotating drilling and rotary impact masonry drill bit.
YG11C	14-14.4	86.5	2060	Suitable for large drill chisel Insert button bits of hard rock flake or column.
YG15	13.9-14.2	86.5	2060	For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drinning and punching and impacting dies.
YG20	13.4-13.8	83.5	2480	For making punching and impacting dies for watch parts and musical instrunments springs, batterles shells and tooth pastes shells, etc., Also for making punching and impacting dies for steel balls of small diameters, screws and nuts, etc.
YG20C	13.4-13.8	82	2480	For making cold heading and cold punching and impacting dies for standardized parts, bearings, bullets head and shell, etc.
YK20	14.3-14.6	86	2250	For wrapped percussive-Rotary drilling bits, drill hard rock better than hard rock.