ETCR7100D Super Large Caliber DC/AC Clamp Meter
USD $691.73 - $691.73 /Set
Min.Order:1 Set
Qingdao Zhibohongyu Trading Co., Ltd.
Function | Measure AC/DC current, Current peak value holding, Online current supervision. |
Power | 6V DC(LR6×4 alkaline dry batteries) |
Test Mode | Clamp CT, Non-contact Test mode |
Clamp Size | 108mm×148mm (can clamp electric cable of 108mm diameter, or 160mm×4mm flat cable and steel earth wires) |
Measurement Range | DC:0.0A~2000A, AC:0.0A~1000A |
Resolution | 0.1A AC/DC |
Measurement Accuracy (Reference condition ) | 0.0mA~999A ±2%±5dgt |
1000A~1499A ±3%±5dgt | |
1500A~2000A ±4%±5dgt | |
Reference condition | 23°C±3°C, below 75%RH, measured wire at the center of the clamp |
Frequency response | AC:45Hz~400Hz |
Sample Rate | About 2 seconds per time |
Measured Wire Position | Measured wire at approximately the geometric center of the clamp |
Display Mode | 4 digitals LCD display |
Dimension | L×W×H:350×180×55(mm) |
Polarity Indication | Automatic recognize in AC test model ,display “-” |
Gear Shift | Automatic shift |
Line Voltage | Below 600V Line Measure |
Data Storage | 99 sets, “FULL” symbol indicate the memory is full |
Peak Holding | Measure and Maintain the peak value, Press HOLD and not let it go would show the peak value in test model . |
Data Hold | “HOLD”symbol appears |
Overflow | “OL”symbol appears |
Automatic Shutdown | Automaticallyshutdown about 5 minutes after power on to reduce battery consumption |
Voltage Detection | Low battery symbol “ " appears to remind the replacement of battery when the battery voltage drops below 4.6V. |
Weight of Meter | 1.5kg (with batteries) |
Reference Power | About 17mW |
Working Temperature and Humidity | -10°C ~ 40°C; 80%rh |
Storage Temperature and Humidity | -10°C ~ 60°C; below 70%rh |
Insulation strength | AC 3700kV/rms(between core and shell) |
SafetySpecifications | IEC1010-1, IEC1010-2-032, 2 class of pollution, CAT III 600V |