Product Details

Specifications

ac adapter 12v 6a for Lcd Monitor LED light
1. Input :AC110V-AC240V
2.output:12v 6A
3.OCP,OVP,SCP
4.dc connector:5.5*2.5mm

ac adapter 12v 6a 5.5*2.5mm for Lcd Monitor LED light

1.Features:

Input:AC 110-240V 50/60HZ
Output:DC 12v 6A
Output DC wire:1.2M
Ripple noise:200mv
Line regulation:+-5%
load regulation:+-5%
Input Voltage Range:AC110V-240V
Input Rated Current:1.0Amp
Input Min. Current:0.1A
Input Power:100VA

2.Technical specification:

Input voltage

Rated Voltage: 100~240Vac

Variation Range: 80V~280Vac

Input Frequency

Rated Frequency: 50/60HZ

Variation Frequency: 47~63Hz

Input current

0.5Amax. at any input voltage and rated, DC output rated load.

Inrush Current

30Amax. @ 264Vac input

Efficiency:

80% min at 100Vac input and output rated .Load.

Turn on delay time:

80% min at 100Vac input and output rated .Load.

3S max. @ 100 Vac to 240 Vac input & Full load

Rise time

20mS max. @ Rated load

Hold up time:

5mS min. @ Full load &230Vac/50Hz input turn off at worst case

Short circuit protection:

The power supply will be auto recovered when short circuit faults remove.

Over current Protection:

The power supply will be auto recovered when over current faults remove

Over Voltage Protection:

The power supply will auto recovered when faults remove 120%~150%.

Environmental requirement:

Operating Temperature: 0~40°C ,full load , normal operation.

Storage Temperature: -20~80°C with package

Relative Humidity: 10%(0°C) ~90%(40°C) RH

3.Warranty:

1. We provide 1 year warranty.

2. Normal Production according to the sample that confirmed by customers or customer's instruction. So please do give us right and confirmed instruction as well as check the sample carefully before you confirm.

3. Should you need any assistance with product problems please feel free to contact us.You will receive a prompt reply from us

a. You are buying a 100% Brand New Product, Guaranteed to be a Compatible !
b. We save your money and offer you quality product that meets safety & environmental standards !
c. our mission is to provide people with the electronics and computer parts to create and design their own figures .
d. We are growing and changing all the time. But our goal remains the same to keep providing "Customer Satisfaction" for our customers!
e. We are committed to offering high-quality and low-cost electronics, computer equipment and parts.

f. Our primary mission is your satisfaction with our products. We try our best to ensure at most customer satisfaction.

4.Fit for :

cctv camera ,LED strip ,LCD monitor,LCD screen etc

5.about us :

Our company is the professional manufactuer and specialized in power adapter of laptop ,tablet,mp3

mobile phone,cctv camera ,

6.Reliability:

1)Heat-resistance: The switch power supply shall be stored at a temperature of 55+/-2 °C for 16 hours. Then No distortion and (Storage) it shall be subjected to standard astrospheres conditions for 2 hours,

2)Heat resistance: The switch power supply shall be placed at a temperature of 25+/-2 °C and operating at No abnormity (Operation) full load for 4 hours. Measurement shall be made.

(3)Cold-resistance: The switch power supply shall be stored at a temperature of -20+/-2 °C for 16 hours. No distortion and
(Storage) Then it shall be subjected to standard astrospheres conditions for 2 hour, No function errorafter which measurement shall be made.

4)Cold-resistance: The SMPS shall be placed at a temperature of 0+/-2 °C and operating at No abnormity (Operation) rate75% full load for 4 hours. Measurement shall be made.

5)Body surface temp: at a entironment temperature of 23+/-2 °C , 100VAC/2.0A load ≤65°CFor 2 hours, measure central section of sueface (thermoelectric couple method)