Product Details

Product: 4 Channel Digital Video/Audio/Data fiber optical video multiplexer

Overview

Single mode 20Km 4 channel Video multiplexer can simultaneously transmit 4 channels broadcast quality video,1-4 channels unidirectional or bidirectional audio,1-4chnnels unidirectional or bidirectional data,one port Ethernet,Telephone and Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease installation and operation. All the electronic and optical interface comply with international standards,customer need not to do any adjustments during installation. LED indicators are provided for instantly monitoring system status. Standalone or rack-mount video fiber multiplexer are available ,which is suitable for different working environment .

Feature

4channels encoded and non-compression broadcast quality video transmission

Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols

Support any high-resolution video signal

Automatic compatible PAL, NTSC and SECAM video system

1-4 channels audio (optional)

1-4 channels asynchoronus data (optional)

1 port 10/100Mbps ethernet (optional)

Power supply and other parameter status indication, which can monitor the operation condition of system

Support no-damage regenerative trunk of video

Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .

Industry-grade of operating temperature from -40 to 85 degree , which is applied to the different working environment

Hot-swap supportted

Stand-alone type or card-type installed in 19inch 2U or 4U rack-mount chassis.

Technical Specification
Video interface

Video	4channels
Video bandwidth	8 MHz
Automatic compatible video system	PAL,NTSC,SECAM
Video input / output impedance	75 ohm(unbalance)
Video signal-to-noise ratio	more than 67dB
Differential gain	(10%-90%APL) DG <1% ( typical value)
Differential phase	(10%-90%APL) DP <0.7° ( typical value)
Video connector	BNC

Fiber-optic Specification		F/O connector: FC/ST/SC TX :Power:-8 ~ -3dBm Sensitivity :less than-35dBm RX:Power:-15 ~ -8dBm Sensitivity :less than-24dBm Transmission Distance :20KM (single mode) Operating Wavelength: TX1310/RX1550nm(Transmitter);TX1550/RX1310nm(Receiver)
Specification of custom-made options
Data		Connector: Terminal Blocks Encoded type : RS485 / RS422 / RS232 / Manchester Data rate : 0 - 400Kbps BER: ≤10^-9
Audio		Connector: Terminal Blocks Audio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted)
Telephone		Connector: RJ11 Bandwidth :8KHZ Features:Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO
Ethernet		Connector: RJ45 Support mode : Half duplex or Full duplex Standards:IEEE802.3 Data rate : 10M / 100Mbps Bandwidth: 25M

Dimensions :19.2(L)x17.3(W)x2.8(H) cm

Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )

Operating Temperature: -40 to +85 degree

Storing Temperature : -55 to +85 degree

Humidity: 0 to 95% non-condensing

MTBF : more than 10⁵ hours

Warranty : 3 years

4 ports switch optical Multiplexer picture:

Application

Intelligent Transportation System

Connection of Sub-network for Surveillance Center

Highway video monitoring and control system

Industrial Closed Circuit Television Surveillance

Security monitoring and control system

TV program switching channel transmission

Ordering information

BD-DV4P0000ST	4channel video fiber multiplexer,transmitter,single mode,20Km,dual fiber or WDM for option,AC220V
BD-DV4P000SR	4channel video fiber multiplexer,receiver,single mode,20Km,dual fiber or WDM for option,AC220V
BD-DV4P4P00ST	4channel video fiber multiplexer,transmitter,4channels audio,single mode,20Km,dual fiber or WDM for option,AC220V
BD-DV4P4P00SR	4channel video fiber multiplexer,receiver,4channels audio,single mode,20Km,dual fiber or WDM for option,AC220V

FAQ:

1.How can i get a 4 channel video multiplexer sample ?

You need place sample order to us.We will arrange the sample production for you.

2.Could you do design for us?

Yes, we can do artwork including printing, logo etc. for you, if you provide us the content and tell us where to put.

3.How can we place order?

After we made agreement on the product' parameters, we will make proforma invoice for your confirmation.when we got your advance payment (deposit) we will arrange the production and delivery.

If you have your own ship forwarder, we will use your ship forwarder to delivery goods. if you don't have ship forwarder, then when the goods arrived at Destination port, you must find a ship forwarder help you clear the custom.

4.How about the shipping for 4 channel video multiplexer ?

For small orders, we will send the goods by International Express like HK Fedex, DHL, TNT or UPS. usually it takes about 7work days to arrive.If big quantity we will ship by Ocean transportation, it takes one month to arrive. if urgnet, you can select shipping by Air, but freight charge will be more expensive.

5.what's your products' advantages ?

A. good quality and competetive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing and shipping.

D. Aftersale services, if there is quality problem, we will offer you replacement for defective quantity.

Packaging & Shipping

The devices will be well packaged by carton with Foam or other shock proof materials.

Certifications

Factory Production

After Sales Services

The goods warranty time is THREE years,we will provide best support by TEL,email,remote control or engineers in field.

Your any questions will be responsed within 12hours!