Product Details

Product: 360 POTS Phone over fiber Multiplexer telecom equipment

Functions:

360 voice fiber multiplexer is a kind of point-to-point fiber transmission device. BAUDCOM designed 1~360POTS (FXO/FXS),it is a multi-service fiber multiplexer which can realize 360channel voice and 1~4 E1,1~4 Fast ethernet over fiber transmission. 360 voice fiber multiplexer is rack mount device and total 15 slots, 12slots for 30voice card and 1 slots for E1 and Ethernet card,2 slots for for power supply module.The device support SNMP management for option.

Feature:

19 inch rackmout ,9U high chassis and easy for installation;

Can control the remote alarm status for option;

Ethernet is 10M/100M,full/half duplex adaptive, support VLAN£;(optional)

Network management (optional);

ETH support Auto-MDIX;

1-360 lines phone, support call indication;

Support each site puts the number to each other;

Audio ports support FXO and FXS,FXO connected with switches,FXS with users' phone;

Can distinguish the opposite device is shut down or fiber not connected well (optional);

User can become conscious of the temperature and voltage of the local device Network management function

User can also become conscious of the temperature and voltage of the remote device , and can set the alarm threshold of the remote device temperature(optional);

Support power backup,make sure complete working funciton.

Optical interface

Optical wavelength: single mode 1310nm/1550nm

Fiber: single fiber or double fiber for option

Transmitting consumption: -9dBm/-5dBm

Transmission range: 0-50Km/120Km for option

Optical interface: SC/FC

Receiving and dispatching module: >-6dBm

Optical receiver receiving sensitivity <-36 dBm (BER<10-11)

Fiber circuit code: NRZ code

10/100Base-T Interface

Rate: 10/100M, full/duplex auto-negotiation

Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Entiries: 4096 Entiries

Total Memory Sizes: 64MBits SDRAM

Physical interface: RJ45, support AUTO-MDIX

FXS:

Alarm voltage: 75V

Alarmf requency: 25HZ

2 line input impedance: 600ohm (hanging off)

Wastage: 40db

FXO:

Alarm detecting voltage: 35V

Alarm detecting frequency: 17HZ-60HZ

2 line input impedance: 600ohm (hanging off)

Wastage: 40db

E1 Interface

Interface standard: Conforms to G.703 standard

Interface rate: N=64Kbps, N:1~32

Vibration characteristic: Satisfies G.742 and G.823 standard

Transmission capacity: 1*E1

Clock type: internal-clock, route clock

Connecter: BNC (75 ohm¸), RJ45 (120 ohm¸)

Interface impedance: 75ohm (non- balanced), 120ohm (balanced)

Power supply

working voltage range wide, good

anti-disturb and Isolation, work stable

option I DC-48V,range DC-36V~DC-72C

option II AC220V,range AC165V~AC240V

Power Consumption: <=3 Watts

environment condition

Operating temperature: 0C~+50 C

Storage temperature: -20 C~+70 C

Relative temperature:95% (uncondensed)

Dimension(19inch rackmount)

482mm(L)

275mm(W)

385mm(H)

360 pots FXO FXS voice fiber multiplexer picture :

application:

360 voice fiber multiplexer Ordering information

BD-OP-MUX360/CH 19inch rackmount ,9U high chassis

BD-OP-MUX360/P/DC DC power module,comply with BD-OP-MUX360/CH

BD-OP-MUX360/P/AC AC power module,comply with BD-OP-MUX360/CH

BD-OP-MUX360/30FXO 12 channel FXO module,comply with BD-OP-MUX360/CH

BD-OP-MUX360/30FXS 30 channel FXS module,comply with BD-OP-MUX360/CH

BD-OP-MUX360/4E1/4ETH 4E1+4ethernet module,SC/FC, SM20km,comply with BD-OP-MUX360/CH