Single output 100W Switching power supply for unicycle/E-bike battery charger
USD $1 - $99 /Piece
Min.Order:500 Pieces
Shenzhen Lianyunda Electronics Co., Ltd.
Single output 100W Switching power supply for unicycle/E-bike battery charger
Details
1) input voltage: AC 100-240V 50/60HZ
2) range voltage: AC 90-264V 47/63HZ
3) output Power:96W
4) output voltage:4.2-58.8V
5) output currency:0-6A
Safety Approvals
UL/CUL, PSE, GS, BS, CE, CB, FCC, and EK-Mark,CCC Certification
Protections
1)over voltage protection: 120%min
2)over current protection: 120%min
3)over protection
4Short-circuit protection: automatic recovery
5Load regulation: ±5%
Environmental requirement
1)operating temperature: 0-40
2)storage temperature: -20-85
3)opera ting relative humidity:595%RH
4) Withstanding voltage: AC 3,000V (minimum), 5mA (maximum)
5Insulation resistance: DC 500V 100MΩ (minimum)
Brand name: LYD
Advantages
1. AC input power suitable for the world
2. Soft-start current can reduce the AC input impact efficiency
3. With short-circuit and overload protection
4. Compact size ,light weight
5. 100%full-load burning test
6. Installed with EMI filter ,minimum wave
Oupt power range | 4.2-58.8V,0-6A,96W(also have those models for selection) |
The charger size | 5.5*2.1*10 cm |
The charger weight | 90g/pcs |
Input Rated Voltage | 100Vac~240Vac |
Input Frequency Range | 50Hz~60Hz |
Input Current | less than 0.5A |
Input Inrush Current | less than 50A |
Efficiency | 90%(MIN)at Rated Voltage |
DC Output Voltage | 48V (option) |
DC Output Current | 2A (option) |
DC Output Power | 96W (optional) |
Leakage Current | less than 5mA |
Standby power | less than 0.5w |
Ripple and Noise | less than 120Mv at full road with 20MHz bandwidth |
Turn On Delay Time | less than 3S (AC:110V and full load) |
Certificates | CE GS UL/CUL FCC ROHS SAA PSE TUVGS KC CLASS2 UL1310 |
Dielectric Voltage | A IEC320 three pin input---output(FG)3000Vac one minute |
Safety protection | output voltage protection (150%-180% rated output current) |
output current protection (150%-180% rated output current) | |
short current protection | |
Operating Temperature | -10°C - +45°C |
Storage Temperature | -20°C - +40°C |
Safety Standard | EN60950-1 UL60950-1 ESD (EN61000 3-3) |
CAS (60950 ITE/TE) FCC Part 15 subpart B Class B | |
ISO 9001: 2008 |
Shenzhen LianYunda Electronics Co., Ltd.
Cindy Cheng
Mobile:86-18664909701
Tel:86-0755-27825520-639
Fax:86-0755-27826541
Skype:woyongyuanshou51306
Whatsapp:86-15272352385
E-mail:sales3@sz-lyd.
Ali Trade Manager:cn1000301449
Add:6F.Maocheng Bldg.Xicheng Ind Area,Bao’an District,Shenzhen
Web: