Name: 0240D010BN/HC-V Hydac filter elements for machine tool industry
Brand: HYDAC
Availability: InStock

Product Details

Product Description

♥ Filter Introduction:

Hydac filter is an integral part of the tube series of conveying medium.

It usually installed in the filter entrance point of hydraulic system, using for filtering prill, pollution of impurities, etc in the fluid medium and protecting the normal work of equipment. When the fluid pass the filter, its impurities will be blocked, and the clean filtrate will expel from the exit of filter.

When filter element need to be cleaned, you just get out it from the filter and install it after cleaned by industrial liquid.

Stainless steel hydraulic filters from the monolayer or multilayer metal mesh and filter made of mesh wire mesh layers and composition depending on the conditions of use and purpose, concentric rate, withstand pressure, straightness, stainless steel without any glitches, to ensure long life. Used in industrial lubricants, fuel coarse filter, fine filter in distillation, absorption, evaporation and filtration process, there are a variety of models and specifications, installation and replacement; convenient, small initial pressure, long-wash cycle.

♥ Stainless Steel Filter Product Description: Made of single or multilayer metal mesh, and the number of layers constituting the screen according to the different conditions of use and purpose, the absolute accuracy of concentric filtration rate, withstand pressure, straightness, stainless steel, without any glitches, to ensure long life.

Material:

304,304 L, 316,316 L stainless steel mesh, woven mesh, welded wire mesh, brass, aluminum net.
Advantages:

Single multilayer spot filter cartridge, the filter, the filter mesh, which have good filterability for 1–500um particles and liquid, a large flow rate per unit area, be used repeatedly after cleaning.

♥ Advantages:

♣ A good filter performance, a filter for the 2-200um particle surfaces may play a uniform filter performance
♣ corrosion resistance, heat resistance, pressure resistance, good wear resistance;
♣ stainless steel filter pores uniform, precise filtering accuracy;

♣ large flow stainless steel filter unit area;
♣ stainless steel filter for low temperature, high temperature environments; After cleaning can then be used to replace for free.

♥ Filter Characteristics:

♦ This filter is made from glass fiber/stainless wire mesh which imported from the USA, possessing the convenient draining, large circulation area, low pressure loss, simple structure, small volume, light weight, evenly filter material amd so on.

♦ The compatibility of the filter material is suitable for general hydraulic oil filter.

♦ The filter element is supported by the either side of the solid and strong stability of filter material, which comform with the verification of ISO3724/76 hydraulic oil flowing fatigue property.

♥ Our HYDAC filter pass following ISO standards:

♦ ISO 2941 Collapse & Burst Resistant

♦ ISO 2942 Material Compatibility with Fluids

♦ ISO 2943 Material Compatibility with Fluids

♦ ISO 3724 Flow Fatigue Characteristics

♦ ISO 3968 Pressure Drop vs. Flow Rate

♦ ISO 16889 Multi-pass Performance Testing

♥ Technical Parameter

Filter material: glass fiber, stainless steel wire mesh, wood pulp

Filter rating: 1µm–200µm

Working pressure: 21bar–210bar

Working temperature:−10°c—+100°c

Sealing material:Nitrile butadiene rubber ring, fluoro rubber

Rated flow: 80-200l/min

Working pressure: 1.5-2.5pa
Filter area: (m2) 0.01-0.20
---Liquid filter the liquid (oil, water, etc.) are contaminated liquid state to produce a clean and living needs, that is, the liquid reaches a certain degree of cleanliness.
---Air pollution is to be cleaned to the state of production and living needs, that is, the air reaches a certain degree of cleanliness.

---The water quality Low (less than 2 ~ 5mg / L) to be further purified