Specifications

1.4 Port Usb Charger And Alarm Anti Theft Intelligent Secuirty System
2.size:16*10*3cm
3.ABS
4.white
5.CE,ISO

4 Port Usb Charger And Alarm Anti Theft Intelligent Secuirty System

 

Specification
 

Operating Voltage	5V DC
Horn Alarm Output	≤120 db at 1 ft
Stand-by Current Consumption	≤3.70mA
Quiescent Current Consumption	≤3.40mA
Activation Current Consumption	≤220mA
Metal Display Frame Color	Black/White
Battery	Lithium-ion battery

 

Function: A disconnect alarm function: contacts separated alarm, disconnect alarm, USB jack unplug alarm. Fortification solution and Defense: auto fortification; solution of anti-manually or remote control anti-solution. Remote control: Infrared remote control ON (Active) / OFF.

Features: Quick Reaction speed, slip or cut any cable, the alarm warning. Once the alarm has been triggered, restitution cannot disarm, the alarm must be reset by remote contro“OFF” key to disarm (press remote control “OFF” key to relief). With higher safety factor, it can protect customer’s property. Built-in alarm horn, high-volume alarm on the bottom, can avoid destruction of the thief. With Remote Control function, easy to use. LED light display current status. Wide range Application: retail chain store or exhibition center for Tablet PC, Camera,Smart phone, GPS and other exhibits anti-theft and reusable .

Operating Step: Power ON/OFF Slide Switch: Please turn power“ON”before setting (on the bottom). Tear off 3M stickers on the bottom, and stick MX-33C metal bottom on display desk. Tear off 3M sticker (Camera Holder) and stick Camera bottom on the Camera Holder, and then fasten the screw between Camera Holder and Camera bottom. Tear off 3M sticker on the Demo-Alert (small detecting sensor), and stick on Camera (front or rear side surface). Set up Demo-Alert in Active position: press“ON”button on Remote Control; you'll hear a beep sound and Red LED blinking (one time), the MX-33C in Active position. Demo-Alert Sensor: there are 2 detecting sensors and phone jack connector are detecting point, either one of detecting point Slip (in active position), Alarm warning immediately and Blue LED blinking until alarm relief. Relief alarm: press Remote Control “OFF” button to relief alarm warning and hear horn alarm. Low Power indicator: when green LED light blinking, please plug USB port into to AC adaptor, mini USB plug into left side Demo-Alert metal base, then AC adaptor plug into Outlet (please avoid battery dried-up). Working Period (in Active): 2 weeks (full charge). Charge Time: 5 hours. Low Power: Green LED blinking until power dried-up or charge. Charging: Red LED turns ON. Full Charge: Green LED turn ON. Alarm: Red LED Blinking. In Active (when you set up Alarm): Blue LED Blinking. Remote Control: 5 units with one remote control.