Battery for European Market, buy 12v 5ah general security battery for alarm fire system emergency lighting on China Suppliers Mobile

Product Details

12v 5ah general security battery for alarm fire system emergency lighting

Battery features:

- Maintenance free

- High power to weight ratio

- No memory effect

- Low self discharge

- CE certificate

- Long service life

- High discharge rate

- Wide operating temperature range

Applications

Data Centre (High Rate UPS
Telecommunication
Banks & Financial Centre
Hospital& Testing Laboratories
Power Generation Plants
Emergency Lighting
Emergency Power Supply
High Power Backup Supply
LED Light
VAN
Wheel chairs
Security system"Alarm system" "CCTV"
"Video" Camera""Loudspeaker"
Marine
Wheel Chair
Mobility scooter

PICTURES OF FACTORY & BATTERY

Specification (lead acid battery):

Nominal Voltage		12V
Rated capacity(20 hour rate)		7.0AH
Dimensions	Length	151±1mm(5.94 inches)
	Width	65±1mm(2.56inches)
	Height	94±1mm(3.70inches)
	Total Height	100±1mm(3.94 inches)
Weight Approx		2.05Kg(4.52lbs)

Characteristic :

Capacity 25°C(77°F)		20 hour rate(0.35A, 10.50V)	7.00AH
		10 hour rate(0.66A, 10.50V)	6.60AH
		5 hour rate(1.20A, 10.50V)	6.00AH
		1 hour rate(4.55A, 9.60V)	4.55AH
Internal Resistance		Full charged Battery at 25 °C (77°F)	25mΩ
Capacity affected by temperature (20 hour rate)		40°C(104°F)	102%
		25°C(77°F)	100%
		0°C(32°F)	85%
		-15°C(5°F)	65%
Self-Discharge at 25°C(77°F)		Capacity after 3 month storage	91%
		Capacity after 6 month storage	82%
		Capacity after 12 month storage	64%
Charge (constant voltage)	Cycle	Initial Charging Currentless than 2.10A Voltage14.40-15.00V
Charge (constant voltage)	Float	Voltage 13.50-13.80V
Terminal		187, 0.187

Warnings:

- Matrix series batteries have acid in the case and are fully charged before leaving factory. Do not attempt to dismantle the battery, if accidental skin/eye contact is made with electrolyte, seek medical advice immediately.

- Do not use a new battery with an old one.

- Do not use the battery in sealed container.

- Each battery should have detailed record including the ex-factory date, installing date and using record.

- Check the connection of wire in a fixed interval (once a year). If there is any looseness should tighten the wire.

- Wipe the surface of the battery with soft cloth in a fixed interval (once three months) and always keep the battery clean.

- Avoid using any kind of organic solvents for cleaning the surface of the battery.

CERTIFICATE :