Product Details

semi automatic toothpaste plastic tube filling sealing machine for sale

Technical parameters

Product name	plastic tube filling sealing machine
Model	HTGF-50 ( plastic tube filling sealing machine)
Voltage	AC380/220 V
Pressure	0.6MP
Power	1.6KW
Productivity	20~30 pcs/min
Filling accuracy	±1%
Hopper capacity	40L
Filling volume	5-25ml 15-150ml 30-200ml (adjustable)
tube diameter	10-50ml
tube lengh	200ml
size	10008001600 ml
weight	about 600 kg

Features

This machine is used for filling all kinds of fluid materials into the soft plastic tubes or plastic-aluminum laminated tubes

The machine can automatically feed tube, orientate eye marks and is used for filling cream (paste)-like and liquid-like materials into plastic tube or plastic-aluminium laminated tube and then sealing them, pressing data or product numbers on the end of the tube and cutting the end. This machine is widely used in daily cosmetics, medicine and food industries.

Characteristics: A high efficient heater and a stable flow meter imported from Germany are applied. They provide a reliable thermo-air heating system, which makes the seal firm and high efficient. The filling heads in different specifications are prepared for materials in different thick.

1. Automatic tube loading, filling, heating, sealing, cutting and tube unloading.
2. The precision of mechanical linking visual detection is within 2 mm.
3. Mechanical tube feeding. Only one unit need to be changed when tube size changing.
4. Inner Heat System, using "Leister" hot air system to assure high quality sealing.
5. Servo motor controls filling, filling volume can be easily adjusted in the touch screen.
6. Plug-in filling type fills the product from the bottom of tubes, which ensures less air mixing with the filling material and decreases the possibility of oxidation.
7. All contact parts are made of Stainless Steel #316, complying with GMP requirements.

Drawing

Use instruction

1 Clean up the debris in the hopper, with good material, and the feed hopper cover good;

2 Connect the power, press the total powerSource switch, counter display 0;

3 Press total power switch,Inverter display "OFF".When the material to the desired temperature,Press Under the Variable Frequency For On "RUN" Button, inverter Display "LS" At the time,Needle Turn Dynamic Variable Frequency For Spin Button(can't be too large,To make the knob inside the tooth surface damage and skid)Motor starting,Indexing disc operation.End of the tail mechanism to start the action (work can be adjusted at any time to adjust the frequency converter to the appropriate operating speed);

4 Press the filling button (the photoelectric probe to start working), begin to work (machine artificial intubation).When,Rotary table driven air traffic control to the mouth,Photoelectric sensor to get the signal,Start filling(socket without tube filling);When the metering pump to complete an action, the micro switch to get the signal, then the filling stop. Metering pump action Finish one,Counter count (the counter may be cleared at any time)Such a cycle.

5 One filling is discharged from the metering pump air, so the air filling Check the filling quantity, if there is a difference according to the sixth chapter adjustment measurement;

6 At the end of the work, turn off the filling switch in turn, turn the frequency converter to the dial to stop.Stop operation, and cut off the power supply.

Application

Applicable to medicine,Product packaging in the fields of daily chemical, food, chemical, etc.. Such as: piyanping ointment, agent, toothpaste, shoe polish,Hair Coloring,Adhesive, AB Glue, epoxy glue, neoprene material filling and sealing.

Product image

Packaging & Shipping

Standard Export wooden case.

Delivery within 15-30 days